Menu

0

$0.00

Hubs & Spindles

19 ITEMS

Hide Filter

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This part is the Lug Nut Stud that fits into the Drum and receives the lug nut after the wheel has been mounted.
  • Does One Rear Wheel
  • These are "Clipped" Studs for the REAR wheels on the 1980 - 1987 Models
  • FINISH: Zinc
  • OEM - Made by SUZUKI

What Will I Receive?

  • Qty 5 - Lug Nut Studs (Rear Wheels)

What Vehicle Will This Fit?

  • Suzuki Samurai       1988 - 1987       All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This part is the Lug Nut Stud that fits into the Drum and receives the lug nut after the wheel has been mounted.
  • Does Both Rear Wheels
  • These are "Clipped" Studs for the REAR wheels on the 1980 - 1987 Models
  • FINISH: Zinc
  • OEM - Made by SUZUKI

What Will I Receive?

  • Qty 10 - Lug Nut Studs (Rear Wheels)

What Vehicle Will This Fit?

  • Suzuki Samurai      1988 - 1987       All Models
  • Suzuki SJ410           1980 - 1984       All Models

What is This Part?

  • This is the Locking Hub Service Kit which does both the LH and RH Sides.
  • OEM
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Locking Hub Packing (LH & RH)
  • Qty 2 - Locking Hub Washer (LH & RH)
  • Qty 2 - Axle Circlip (LH & RH)

What Vehicle Will This Fit?

  • Suzuki Samurai         1985-1995
  • Suzuki SJ413              1985-1995

What is This Part?

  • These are the CONE WASHERS that fit onto the Locking Hub Installation Bolts.
  • INCLUDES One Full Set of Cone Washers (Does One Locking Hub - RH or LH)
  • Direct Replacement

What Will I Receive?

  • Qty 6 - Cone Washers (Does One Locking Hub - RH or LH)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models
  • Suzuki SJ410           1980 - 1984       All Models

What is This Part?

  • These are the CONE WASHERS that fit onto the Locking Hub Installation Bolts.
  • INCLUDES Two Full Sets of Cone Washers (Does BOTH Locking Hubs)
  • Direct Replacement

What Will I Receive?

  • Qty 12 - Cone Washers

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995       All Models
  • Suzuki SJ413            1985 - 1995       All Models
  • Suzuki SJ410           1980 - 1984       All Models

What is This Part?

  • This is the Washer Set for the Front Axle Hub.
  • OEM
  • Complete for both sides.

 What Will I Receive?

  • Qty 2 - Lock Washers
  • Qty 2 - Star Washers

What Vehicle Will This Fit?

  • Suzuki Samurai      1986 - 1995       All Models
  • Suzuki SJ413           1985 - 1995       All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • Stocked & Shipped From – USA
  • NEW in the Original Packaging

What is This Part?

  • This is the Locking Hub Service Kit which does both the LH and RH Sides.

What Will I Receive?

  • Qty 2 - Locking Hub Packing (LH & RH)
  • Qty 2 - Locking Hub Washer (LH & RH)
  • Qty 2 - Axle Circlip (LH & RH)

What Vehicle Will This Fit?

  • Suzuki Samurai         1985-1995
  • Suzuki SJ410             1980-1984

General Information

  • NEW in the Original Packaging - (Unless Bulk Packed)
  • OEM - Made by SUZUKI
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This part is the Lug Nut Stud that fits into the Drum and receives the lug nut after the wheel has been mounted.
  • It is part number 09119-12006.
  • To replace all studs it requires 5 studs per drum.
  • These are for the REAR wheels only.
  • The front wheels require a different type stud part #09119-12008, which we also sell.
  • To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
  • Note: Color May vary

 

What Will I Receive?

  • Qty 10 - Lug Nut Studs (Rear Wheel)

 

What Vehicle Will This Fit?

  • Suzuki Samurai      1988 - 1995       All Models
  • Suzuki SJ413           1988 - 1995       All Models

What is This Part?

  • This part is the Suzuki OEM Lug Nut Stud that fits into the Front Rotor and receives the lug nut after the wheel has been mounted.
  • It is part number 09119-12008.
  • To replace all studs it requires 5 studs per rotor.
  • These are for the front wheels only.
  • The rear wheels requires stud #09119-12006, which we also sell. To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
  • NOTE: Color May vary
  • NOTE: THESE WHEEL STUDS ARE THE NON-CLIPPED HEAD. The 1986 - 1988 have a clipped head. This changed occurred in the late 88' thru early 89' models so please verify which type you need if you are ordering for an 88' or 89' Samurai. From the 90' model Samurai on to 95’ they were all Non-Clipped.
  • Direct Replacement

What Will I Receive?

  • Qty 5 - Lug Nut Studs (Front Wheel)

What Vehicle Will This Fit?

  • Suzuki Samurai   1988 - 1995    All Models
  • Suzuki SJ413       1988 - 1995   All Models

What is This Part?

  • These are the CONE WASHERS & BOLTS that fit onto the Locking Hubs.
  • INCLUDES Two Full Sets of Cone Washers & Bolts (Does BOTH Locking Hubs)
  • Direct Replacement

What Will I Receive?

  • Qty 12 - Cone Washers
  • Qty 12 - Bolts
  • Qty 12 - Lock Washers

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

What is This Part?

  • This is the Nut and Washer Set for the Front Axle Hub.
  • Complete for both sides.
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Lock Washers
  • Qty 2 - Star Washers
  • Qty 4 - Nuts

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This part is the Lug Nut Stud that fits into the Drum and receives the lug nut after the wheel has been mounted.
  • It is part number 09119-12006.
  • To replace all studs it requires 5 studs per drum.
  • These are for the REAR wheels only.
  • The front wheels require a different type stud part #09119-12008, which we also sell. To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
  • Note: Color May vary
  • Direct Replacement

What Will I Receive?

  • Qty 5 - Lug Nut Studs (Rear Wheel)

What Vehicle Will This Fit?

  • Suzuki Samurai       1988 - 1995        All Models
  • Suzuki SJ413           1988 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Front Axle Grease Caps for the LH & RH Axles.
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Front Axle Grease Caps

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the LH and RH Suzuki OEM Front Spindles.
  • This will complete Both Sides.
  • NOTE: Already has Brass Bushings pressed into place.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - RH Front Spindle
  • Qty 1 - LH Front Spindle

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Front Spindle
  • This will do one side.
  • NOTE: Already has Brass Bushing pressed into place.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Front Spindle with Brass Bushing pressed into place.

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These are the CONE WASHERS & BOLTS that fit onto the Locking Hubs.
  • INCLUDES One Full Set of Cone Washers & Bolts (Does One Locking Hub - RH or LH)
  • Direct Replacement

What Will I Receive?

  • Qty 6 - Cone Washers
  • Qty 6 - Bolts
  • Qty 6 - Lock Washers

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models
  • Suzuki SJ410           1980 - 1984       All Models

What is This Part?

  • This part is the Suzuki OEM Lug Nut Stud that fits into the Front Rotor and receives the lug nut after the wheel has been mounted.
  • It is part number 09119-12008.
  • To replace all studs it requires 5 studs per rotor.
  • These are for the front wheels only.
  • The rear wheels requires stud #09119-12006, which we also sell. To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
  • NOTE: THESE WHEEL STUDS ARE THE NON-CLIPPED HEAD. The 1986 - 1988 have a clipped head. This changed occurred in the late 88' thru early 89' models so please verify which type you need if you are ordering for an 88' or 89' Samurai. From the 90' model Samurai on to 95’ they were all Non-Clipped.
  • Direct Replacement

What Will I Receive?

  • Qty 10 - Lug Nut Studs (Front Wheel)

What Vehicle Will This Fit?

  • Suzuki Samurai   1988 - 1995    All Models
  • Suzuki SJ413       1988 - 1995   All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These are Axle Grease Caps that fit a wide array of Vehicle Make and Models.
  • Made from 1.5mm Thick Steel
  • Cap Shaft is 40mm Wide
  • Cap Flange is 49mm Wide
  • Cap Height is 20mm
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Grease Caps

What Vehicle Will This Fit?

  • (Confirm Size to above Specifications)
  • Honda
  • Suzuki
  • Toyota
  • Nissan
  • Datsun
  • Maruti
  • Mazda

What is This Part?

  • This part is the Suzuki OEM Lug Nut Stud that fits into the Front Rotor and receives the lug nut after the wheel has been mounted.
  • It is part number 09119-12008.
  • To replace all studs it requires 5 studs per rotor.
  • These are for the front wheels only.
  • The rear wheels requires stud #09119-12006, which we also sell.
  • To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
  • NOTE: THESE WHEEL STUDS ARE THE NON-CLIPPED HEAD. The 1986 - 1988 have a clipped head. This changed occurred in the late 88 thru early 89 models so please verify which type you need if you are ordering for an 88' or 89' Samurai. From the 90' model Samurai on to 95’ they were all Non-Clipped.
  • ALSO INCLUDED: Lug Nuts for the Front Wheel Studs!

What Will I Receive?

  • Qty 10 - Front Studs
  • Qty 10 - Lug Nuts

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models
  • Suzuki SJ413           1985 - 1995       All Models