Hubs & Spindles

General Information

• NEW in the Original Packaging
• Stocked & Shipped From - LEXINGTON, KY

What is This Part?

• This part is the Lug Nut Stud that fits into the Drum and receives the lug nut after the wheel has been mounted.
• Does Both Rear Wheels
• These are "Clipped" Studs for the REAR wheels on the 1980 - 1987 Models
• FINISH: Zinc
• OEM - Made by SUZUKI

What Will I Receive?

• Qty 10 - Lug Nut Studs (Rear Wheels)

What Vehicle Will This Fit?

• Suzuki Samurai      1988 - 1987       All Models
• Suzuki SJ410           1980 - 1984       All Models

General Information

• NEW in the Original Packaging - (Unless Bulk Packed)
• OEM - Made by SUZUKI
• Stocked & Shipped From - LEXINGTON, KY

What is This Part?

• This part is the Lug Nut Stud that fits into the Drum and receives the lug nut after the wheel has been mounted.
• It is part number 09119-12006.
• To replace all studs it requires 5 studs per drum.
• These are for the REAR wheels only.
• The front wheels require a different type stud part #09119-12008, which we also sell.
• To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
• Note: Color May vary

What Will I Receive?

• Qty 10 - Lug Nut Studs (Rear Wheel)

What Vehicle Will This Fit?

• Suzuki Samurai      1988 - 1995       All Models
• Suzuki SJ413           1988 - 1995       All Models

What is This Part?

• This part is the Suzuki OEM Lug Nut Stud that fits into the Front Rotor and receives the lug nut after the wheel has been mounted.
• It is part number 09119-12008.
• To replace all studs it requires 5 studs per rotor.
• These are for the front wheels only.
• The rear wheels requires stud #09119-12006, which we also sell. To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
• NOTE: Color May vary
• NOTE: THESE WHEEL STUDS ARE THE NON-CLIPPED HEAD. The 1986 - 1988 have a clipped head. This changed occurred in the late 88' thru early 89' models so please verify which type you need if you are ordering for an 88' or 89' Samurai. From the 90' model Samurai on to 95’ they were all Non-Clipped.
• Direct Replacement

What Will I Receive?

• Qty 5 - Lug Nut Studs (Front Wheel)

What Vehicle Will This Fit?

• Suzuki Samurai   1988 - 1995    All Models
• Suzuki SJ413       1988 - 1995   All Models

General Information

• NEW in the Original Packaging
• Stocked & Shipped From - LEXINGTON, KY

What is This Part?

• This part is the Lug Nut Stud that fits into the Drum and receives the lug nut after the wheel has been mounted.
• It is part number 09119-12006.
• To replace all studs it requires 5 studs per drum.
• These are for the REAR wheels only.
• The front wheels require a different type stud part #09119-12008, which we also sell. To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
• Note: Color May vary
• Direct Replacement

What Will I Receive?

• Qty 5 - Lug Nut Studs (Rear Wheel)

What Vehicle Will This Fit?

• Suzuki Samurai       1988 - 1995        All Models
• Suzuki SJ413           1988 - 1995       All Models

What is This Part?

• This part is the Suzuki OEM Lug Nut Stud that fits into the Front Rotor and receives the lug nut after the wheel has been mounted.
• It is part number 09119-12008.
• To replace all studs it requires 5 studs per rotor.
• These are for the front wheels only.
• The rear wheels requires stud #09119-12006, which we also sell. To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
• NOTE: THESE WHEEL STUDS ARE THE NON-CLIPPED HEAD. The 1986 - 1988 have a clipped head. This changed occurred in the late 88' thru early 89' models so please verify which type you need if you are ordering for an 88' or 89' Samurai. From the 90' model Samurai on to 95’ they were all Non-Clipped.
• Direct Replacement

What Will I Receive?

• Qty 10 - Lug Nut Studs (Front Wheel)

What Vehicle Will This Fit?

• Suzuki Samurai   1988 - 1995    All Models
• Suzuki SJ413       1988 - 1995   All Models