Menu

1

$29.99

SUZUKI

705 ITEMS

Hide Filter

show blocks helper

Product categories -

  • 32 Differential
  • 29 Fuel System
  • 38 Steering Knuckle
  • 30 Bolts, Washers, etc....
  • 46 Brakes
  • 40 Suspension
  • 24 Steering Column & Linkage
  • 57 Axles
  • 17 Drive Shaft & U-Joint
  • 72 Transfer Case
  • 77 Transmission
  • 113 Engine Parts
  • 11 Exhaust
  • 23 Cooling System
  • 38 Electrical
  • 24 Cables
  • 44 Locks & Latches
  • 134 Interior Parts
  • 109 Exterior Parts
  • 47 Body Panels
  • 44 Lights
  • 14 Soft Top Parts
  • 39 Weatherstrip, Edging
  • 16 Wheel & Tire
  • 19 Book & Manual
  • 107 SIDEKICK / TRACKER

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Lexington, KY

What is This Part?

  • This is the Suzuki OEM Dash Tray for The LHD (USA) model Suzuki Samurai
  • I’m the only seller on Ebay with the LHD Tray.
  • All other New Trays sold on eBay are for the RHD Model (European) model.
  • Direct Replacement
  • CLEARANCE - May have small chip, crack or other defect no larger than 1/4"

What Will I Receive?

  • Qty 1 - Dash Tray

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These Suzuki OEM parts attach to the inside door window frame and keeps glass tight inside the window frame.
  • Glass Channel Run Has Contour Cuts Pre-Made Into the Rubber for Easy Installation
  • All Parts Have Felt Covered Surface So The Glass Glides Easily Though the Channel
  • Genuine OEM Parts
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Glass Run - LH & RH
  • Qty 2 - Inner Glass Door Scrapes - LH & RH
  • Qty 2 - Outer Glass Door Scrapes - LH & RH

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Model
  • Suzuki SJ410           1980 - 1984        All Model

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These are the Suzuki Japanese OEM King Pins for the Knuckle/Axle
  • These will fit the top and bottom of either side (Left or Right)
  • Made in Japan - Highest Quality
  • Direct Replacement

What Will I Receive?

  • Qty 2 - King Pins  (Driver or Passenger Side)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These are the Suzuki Japanese OEM King Pins for the Knuckle/Axle
  • These will fit the top and bottom of both sides (LH & RH)
  • Made in Japan - Highest Quality
  • Direct Replacement

What Will I Receive?

  • Qty 2 - King Pins  (Driver’s Side)
  • Qty 2 - King Pins  (Passenger’s Side)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These are the Suzuki OEM Steering Knuckle Assembly's for the Driver & Passenger Sides.
  • Driver Side & Passenger Sides Included
  • OEM Parts
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Steering Knuckle Assembly (Passenger Side)
  • Qty 1 - Steering Knuckle Assembly (Driver Side)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the complete Steering Knuckle & Steering Knuckle Rebuild Kit for Left Hand Side.
  • Driver Side
  • Get everything you need to completely rebuild your Driver Side Front-End Knuckle.
  • Includes OEM Knuckle Assembly
  • Comes with King Pins & Bearings!
  • Comes with Felt & Oil Seal!
  • COMPLETE LEFT SIDE!
  • Direct Replacement
  • NOTE: Color of Oil Seal may vary

What Will I Receive?

  • Qty 1 - Steering Knuckle Assembly
  • Qty 2 - King Pins
  • Qty 2 - King Pin Bearings
  • Qty 2 - Shims for King Pins
  • Qty 1 - Steering Knuckle Oil Seal
  • Qty 1 - Steering Knuckle Felt
  • Qty 2 - Retainer Plates, Knuckle Oil Seal
  • Qty 2 - Cover Plates, Knuckle Oil Seal

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the complete Steering Knuckle & Steering Knuckle Rebuild Kit for RH Side.
  • Passenger Side (RH)
  • Get everything you need to completely rebuild your Passenger Side Front-End Knuckle.
  • Includes OEM Knuckle Assembly
  • Comes with King Pins & Bearings!
  • Comes with Felt & Oil Seal!
  • COMPLETE RH SIDE!
  • Direct Replacement
  • NOTE: Color of Oil Seal may vary

What Will I Receive?

  • Qty 1 - Steering Knuckle Assembly
  • Qty 2 - King Pins
  • Qty 2 - King Pin Bearings
  • Qty 2 - Shims for King Pins
  • Qty 1 - Steering Knuckle Oil Seal
  • Qty 1 - Steering Knuckle Felt
  • Qty 2 - Retainer Plates, Knuckle Oil Seal
  • Qty 2 - Cover Plates, Knuckle Oil Seal

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the complete Steering Knuckle & Steering Knuckle Seal Kit for Left Hand Side.
  • Driver Side
  • Get everything you need to replace your Driver Side Front-End Knuckle.
  • Includes OEM Knuckle Assembly
  • Comes with Felt & Oil Seal!
  • Direct Replacement
  • NOTE: Color of Oil Seal may vary

What Will I Receive?

  • Qty 1 - Steering Knuckle Assembly (Driver Side)
  • Qty 1 - Steering Knuckle Oil Seal
  • Qty 1 - Steering Knuckle Felt
  • Qty 2 - Retainer Plates, Knuckle Oil Seal
  • Qty 2 - Cover Plates, Knuckle Oil Seal

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the complete Steering Knuckle & Steering Knuckle Seal Kit for RH Side.
  • Passenger Side (RH)
  • Get everything you need to replace your Passenger Side Front-End Knuckle.
  • Includes OEM Knuckle Assembly
  • Comes with Felt & Oil Seal!
  • Direct Replacement
  • NOTE: Color of Oil Seal may vary

What Will I Receive?

  • Qty 1 - Steering Knuckle Assembly
  • Qty 1 - Steering Knuckle Oil Seal
  • Qty 1 - Steering Knuckle Felt
  • Qty 2 - Retainer Plates, Knuckle Oil Seal
  • Qty 2 - Cover Plates, Knuckle Oil Seal

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is a Suzuki OEM Steering Knuckle Assembly for Driver / Left Side.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Steering Knuckle Assembly (Driver Side)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is a Suzuki OEM Steering Knuckle Assembly for Passenger / Right Side.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Steering Knuckle Assembly (Passenger Side)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These are the Genuine Suzuki OEM Steering Knuckle Oil Seal FELTS.
  • Repairs Driver & Passenger Side Steering Knuckles
  • Made in Japan by Suzuki
  • Direct Replacement

What Will I Receive?

  • Qty 2 Sets - Steering Knuckle Felts

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the OEM Suzuki Samurai Driver's Seat Back.
  • This is an OEM Seat Back so your parts will fit perfectly onto this seat; no drilling, no cutting, no cussing, just bolts right up.
  • All you will need to do is to remove your existing seat and take off the seat slides and seat recline mechanism and bolt directly on to this seat.
  • The seat color pattern is the original 1985 Samurai Pattern that was used for years.
  • This seat is made from heavy, durable pressed vinyl and has an off-white patterned seating area and a dark gray side and back.
  • This will fit in both JL and JX models.
  • If you need seat slides we have them (Just look under “Interior Parts”)
  • NOTE: This listing DOES NOT include the Seat Back, Tilt Mechanism or Attachment Bolts. You must use your existing parts.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Seat Back Cushion - Driver’s Side

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This part is the Suzuki OEM door glass for Both Sides!
  • You will also receive the attachment seals and metal frame to attach the glass to the regulators.
  • With the new Rubber glass seal and metal glass frame installing this is a breeze.
  • OEM Parts
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Door Glass / LH Side (Drivers Side)
  • Qty 1 - Door Glass / RH Side (Passengers Side)
  • Qty 4 - Rubber Glass Seals (2 for each side)
  • Qty 2 - Glass Mounting Frames (1 for each side)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • New in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What Is This Part?

  • NEW in the Original Packaging
  • Genuine SUZUKI OEM
  • These are the molding pieces that trim in the metal fender (flares) extensions.
  • Only fits on the metal fender flares 91, 92, 93, 94 & 95 years
  • Includes 2 pieces total
  • Complete One Side of Samurai
  • Snaps into place
  • Direct Replacement

What Will I Receive?

  • Qty 2 – Trim Pieces

What Vehicle Will This Fit?

  • Suzuki SJ413      1991 - 1995       All Models

General Information

  • New in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What Is This Part?

  • NEW in the Original Packaging
  • Genuine SUZUKI OEM
  • These are the molding pieces that trim in the metal fender (flares) extensions.
  • Only fits on the metal fender flares 91, 92, 93, 94 & 95 years
  • Includes 4 pieces total
  • Snaps into place
  • Direct Replacement

What Will I Receive?

  • Qty 4 – Trim Pieces

What Vehicle Will This Fit?

  • Suzuki SJ413      1991 - 1995       All Models

General Information

  • New in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Rear Axle Housing, Stud Bolts, Filler/Drain Plugs & Breather Cap.
  • This Part Houses all the Rear Drivetrain Parts.
  • Genuine Suzuki OEM Parts
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Rear Axle Housing
  • Qty 8 - Stud Bolts
  • Qty 1 - Breather Cap Assembly
  • Qty 1 - Filler Plug
  • Qty 1 - Drain Plug & Gasket

What Vehicle Will This Fit?

  • Suzuki Samurai 1985 - 1995       All Models

General Information

  • New in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Air Breather Outlet Hose for the Suzuki EFI 1.3L / 8 Valve Engine (90'-95')
  • NOTE: Only Fits Engines with EFI (does not fit carbureted engines)
  • Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Air Breather Outlet Hose

What Vehicle Will This Fit?

  • Suzuki Samurai      1990 - 1995       All Models

 

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is a Suzuki OEM Filler Plug for the Transmission Case
  • Part # 19 on Diagram (pictured)
  • Size:
    • Diameter:   20mm
    • Length:       15mm
    • Thread:       1.75   (Coarse)

What Will I Receive?

  • Qty 1 - Filler Plug

What Vehicle Will This Fit?

  • Suzuki Samurai       1990 - 1995        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Transmission Spring (Low)
  • This Transmission Spring (Low) is part of the Transmission Gear Mechanism.
  • Qty 2 Required
  • Part #35 on Diagram (pictured)
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Spring, Low

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Transmission Low Speed Shaft Yoke
  • This Low Speed Shaft Yoke connects to the Low Speed Fork Shaft
  • # 6 on Diagram (pictured)
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Yoke, Low Speed Shaft

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Transmission Reverse Shaft Yoke
  • This Reverse Shaft Yoke connects to the Reverse Fork Shaft
  • 8 on Diagram (pictured)
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Yoke, Reverse Shaft

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Transmission Key for Reverse Drive Hub Synchronizer
  • # 41-2 on Diagram (only fits 94’-95’ models)
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Sync Key, Reverse Drive Hub

What Vehicle Will This Fit?

  • Suzuki Samurai      1994 -1995       All Mode

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Transmission Key for Low Hub Synchronizer
  • Genuine Suzuki OEM Part
  • Item # 43 on Diagram (85'-88' Diagram)
  • Item # 40 on Diagram (88.5'-95' Diagram)
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Key, Low Hub Synchronizer

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the INNER SPRING for the Transmission Reverse Guide Pin.
  • Located in the Transmission Shifter Housing
  • Part #7 on Diagram
  • Genuine Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Spring

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Pin Used to Attach the Transmission Low & High Forks to the Shifting Shafts
  • Also Attaches the Yokes to the Shifting Shafts
  • Part #15 on Diagram
  • Genuine Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

  • Qty 1 - PIN, Transmission Low/High Fork to Shaft

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Transmission Reverse Idle Shaft PIN.
  • Part #46 on Diagram
  • Size:  6mm Diameter x 10mm Length
  • Genuine Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Pin, Transmission Reverse Idle Shaft

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Transmission Roller ShaftLocating PIN
  • Part #16 on Diagram
  • Size:  3mm Diameter x 12mm Length
  • Genuine Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Locating PIN, Transmission Roller Shaft

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the SPRING for the Transmission 5th Gear Yoke
  • Part #13 on Diagram
  • Genuine Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Spring

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the SPRING for Transmission Gear Shifting Shaft
  • Part #18 on Diagram
  • Genuine Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Spring

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

General Information

  • NEW in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Complete C Clip & Cir-clip Set for the Transmission on the Suzuki Samurai
  • Includes All Clips Required to Rebuild the Transmission
  • Direct Replacement

What Will I Receive?

  • Qty 1 - C Clip #4
  • Qty 1 - Cir-clip #5
  • Qty 1 - C Clip #21
  • Qty 1 - Cir-clip #23
  • Qty 2 - Cir-clip #24
  • Qty 1 - Cir-clip #28

What Vehicles Will This Fit?

  • Suzuki Samurai     1985 - 1995      All Models

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the SPRINGS for the Transmission Upper Shifter Case Select Return Pins.
  • Part #5 on Diagram
  • Genuine Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Springs

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki Samurai Transmission Roller Bearing Set.
  • Includes All Roller Bearings & Input Shaft Oil Seal / Extension Case Oil Seal
  • Japanese Standard Bearings Made by FAG / NMK / Suzuki Japan / SKF
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Bearing  #3    (see diagram)
  • Qty 1 - Bearing  #20  (see diagram)
  • Qty 1 - Bearing  #22  (see diagram)
  • Qty 1 - Bearing  #27  (see diagram)
  • Qty 1 - Bearing  #29  (see diagram)
  • Qty 1 - Bearing  #30  (see diagram)
  • Qty 1 - Oil Seal, Extension Case
  • Qty 1 - Oil Seal, Input Shaft

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1988       All Models

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki Samurai Complete Transmission Needle & Roller Bearing Rebuild Kit.
  • Includes All Needle & Roller Bearings.
  • Also Includes the Input Shaft Oil Seal & Extension Case Oil Seal
  • (Japanese Standards Bearings) Made by FAG / NMK / Suzuki Japan / SKF
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Roller Bearing  #3
  • Qty 1 - Roller  Bearing  #20
  • Qty 1 - Roller Bearing  #22
  • Qty 1 - Roller Bearing  #27
  • Qty 1 - Roller Bearing  #29
  • Qty 1 - Roller Bearing  #30
  • Qty 1 - Needle Bearing  #2
  • Qty 1 - Needle Bearing  #12
  • Qty 1 - Needle Bearing  #14
  • Qty 1 - Needle Bearing  #16
  • Qty 1 - Needle Bearing  #19
  • Qty 1 - Needle Bearing  #49
  • Qty 1 - Oil Seal - Input Shaft #6
  • Qty 1 - Oil Seal - Extension Case   (Not Shown on Diagram)

What Vehicle Will This Fit?

  • Suzuki Samurai      1988.5 - 1995       All Models

 

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki Samurai Complete Transmission Bearing Rebuild Kit.
  • Gives you everything you need to complete a rebuild without paying for unnecessary parts.
  • Includes a new Breather Plug & Back-Up Switch
  • Also Includes a new Clutch Release Shaft Spring & Bush
  • You also Get Additional Springs, Keys & Clips
  • Complete Needle & Roller Bears - with Input Oil Seal & Extension Case
  • (Japanese Standards Bearings) Made by FAG / NMK / Suzuki Japan / SKF
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Roller Bearing  #3
  • Qty 1 - Roller  Bearing  #20
  • Qty 1 - Roller Bearing  #22
  • Qty 1 - Roller Bearing  #27
  • Qty 1 - Roller Bearing  #29
  • Qty 1 - Roller Bearing  #30
  • Qty 1 - Needle Bearing  #2
  • Qty 1 - Needle Bearing  #12
  • Qty 1 - Needle Bearing  #14
  • Qty 1 - Needle Bearing  #16
  • Qty 1 - Needle Bearing  #19
  • Qty 1 - Needle Bearing  #49
  • Qty 1 - Oil Seal - Input Shaft #6
  • Qty 1 - Oil Seal - Extension Case (On Case Diagram - Not Shown)
  • Qty 1 - Bush  #11
  • Qty 1 - Bush  #48
  • Qty 1 - C Clip #4
  • Qty 1 - Cir-clip #5
  • Qty 1 - C Clip #21
  • Qty 1 - Cir-clip #23
  • Qty 2 - Cir-clip #24
  • Qty 1 - Cir-clip #28
  • Qty 1 - Spring, Low #34
  • Qty 1 - Spring, High #37
  • Qty 2 - Key #40
  • Qty 1 - Pin #43
  • Qty 1 - Breather Plug (On Case Diagram - Not Shown)
  • Qty 4 - Case Pins (On Case Diagram - Not Shown)
  • Qty 1 - Back-Up Switch (On Case Diagram - Not Shown)
  • Qty 1 - Spring,Clutch Release Shaft (On Case Diagram - Not Shown)
  • Qty 1 - Bush,Clutch Release Shaft (On Case Diagram - Not Shown)

What Vehicle Will This Fit?

  • Suzuki Samurai      1988.5 - 1995       All Models

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki Samurai Complete Transmission Bearing & Synchronizer Rebuild Kit.
  • Gives you everything you need to complete a rebuild without paying for unnecessary parts.
  • Includes a new Breather Plug & Back-Up Switch
  • Also Includes a new Clutch Release Shaft Spring & Bush
  • You also Get Additional Springs, Keys & Clips
  • Complete Needle & Roller Bears - with Input Oil Seal & Extension Case
  • (Japanese Standards Bearings) Made by FAG / NMK / Suzuki Japan / SKF
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Roller Bearing  #3
  • Qty 1 - Roller  Bearing  #20
  • Qty 1 - Roller Bearing  #22
  • Qty 1 - Roller Bearing  #27
  • Qty 1 - Roller Bearing  #29
  • Qty 1 - Roller Bearing  #30
  • Qty 1 - Needle Bearing  #2
  • Qty 1 - Needle Bearing  #12
  • Qty 1 - Needle Bearing  #14
  • Qty 1 - Needle Bearing  #16
  • Qty 1 - Needle Bearing  #19
  • Qty 1 - Needle Bearing  #49
  • Qty 1 - Oil Seal - Input Shaft #6
  • Qty 1 - Oil Seal - Extension Case (On Case Diagram - Not Shown)
  • Qty 3 - Synchronizer Ring (high) #36
  • Qty 2 - Synchronizer Ring (low) #32
  • Qty 1 - Bush  #11
  • Qty 1 - Bush  #48
  • Qty 1 - C Clip #4
  • Qty 1 - Cir-clip #5
  • Qty 1 - C Clip #21
  • Qty 1 -Cir-clip #23
  • Qty 2 - Cir-clip #24
  • Qty 1 - Cir-clip #28
  • Qty 1 - Spring, Low #34
  • Qty 1 - Spring, High #37
  • Qty 2 - Key #40
  • Qty 1 - Pin #43
  • Qty 1 - Breather Plug (On Case Diagram - Not Shown)
  • Qty 4 - Case Pins (On Case Diagram - Not Shown)
  • Qty 1 - Back-Up Switch (On Case Diagram - Not Shown)
  • Qty 1 - Spring,Clutch Release Shaft (On Case Diagram - Not Shown)
  • Qty 1 - Bush,Clutch Release Shaft (On Case Diagram - Not Shown)

What Vehicle Will This Fit?

  • Suzuki Samurai      1988.5 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the SHAFT for the Transmission Clutch Release.
  • The Clutch Cable Release Arm attaches to this Shaft.
  • Direct Replacement!

What Will I Receive?

  • Qty 1 - Clutch Release Shaft

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the SHAFT for the Transmission Clutch Release.
  • The Clutch Cable Release Arm attaches to this Shaft.
  • Genuine Suzuki OEM Part
  • Direct Replacement!

What Will I Receive?

  • Qty 1 - Clutch Release Shaft

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is a Genuine Suzuki OEM Clutch Cable Bracket
  • Genuine Suzuki OEM Parts
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Bracket, Clutch Cable

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the BUSH for the Transmission Clutch Release Shaft
  • Genuine OEM Part!
  • Direct Replacement!

What Will I Receive?

  • Qty 1 - BUSH, Clutch Release Shaft

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Spring for the Transmission Clutch Release Shaft
  • Genuine OEM Part!
  • Direct Replacement!

What Will I Receive?

  • Qty 1 - Spring, Clutch Release Shaft

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Transmission Reverse Guide Pin Screw
  • This Reverse Guide Pin Screw goes in the Transmission Shifter Housing and secures the Inner & Outer Springs and Shifter Ball inside the Housing.
  • This Low Speed Guide Pin Screw is located in the Top part of Transmission Shifter Housing Directly above the Low Speed Select Guide Pin.
  • Suzuki OEM Parts
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Screw, Reverse Guide Pin
  • Qty 1 - Screw, Low Speed Guide Pin

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Transmission Reverse Guide Pin Screw
  • This Reverse Guide Pin Screw goes in the Transmission Shifter Housing and secures the Inner & Outer Springs and Shifter Ball inside the Housing.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Screw, Reverse Guide Pin

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Transmission Low Speed Guide Pin Screw
  • This Low Speed Guide Pin Screw is located in the Top part of Transmission Shifter Housing Directly above the Low Speed Select Guide Pin.
  • Genuine Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Screw, Low Speed Guide Pin

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These parts fix the shifting problems with both shifters:
  • The Locating Lever Bolt goes inside the upper transmission housing and guides the shifter’s movement through gear changes
  • The Sheet Shifters goes inside the Transfer case & Transmission shifter housing and sits under the shifters.
  • Both are easy to remove and reinstall with an average total time of about 45 minutes.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Lever Locating Bolt (Small)
  • Qty 1 - Sheet Shift (Transmission)
  • Qty 1 - Sheet Shift (T-Case)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1989        All Models
  • Suzuki SJ413           1985 - 1989        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These parts fix the shifting problems with both shifters:
  • The Locating Lever Bolt goes inside the upper transmission housing and guides the shifter’s movement through gear changes
  • The Sheet Shifters goes inside the Transfer case & Transmission shifter housing and sits under the shifters.
  • Both are easy to remove and reinstall with an average total time of about 45 minutes.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Lever Locating Bolt (Large)
  • Qty 1 - Sheet Shift (Transmission)
  • Qty 1 - Sheet Shift (T-Case)

What Vehicle Will This Fit?

  • Suzuki Samurai       1990 - 1995        All Models
  • Suzuki SJ413           1990 - 1995        All Models

General Information

  • New in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What Is This?

  • This is the Suzuki OEM Speedometer Gear Case
  • This is the Case that the Gear fits into in the Transfer Case Housing.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Case, Speedometer Gear

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What Is This?

  • This is the Suzuki OEM Speedometer Gear Case, O-Ring & Oil Seal Kit
  • This is the Case that the Gear fits into in the Transfer Case Housing.
  • Includes Both O-Rings & Oil Seal!
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Case, Speedometer Gear
  • Qty 1 - O-Ring (Outer)
  • Qty 1 - O-Ring (Inner)
  • Qty 1 - Oil Seal

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models

General Information

  • New in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Cir-Clip (C-Clip) for the Transfer Case Input & Output Shafts
  • This C-Clip is part of the Gear System and attaches to the Input & Output Shafts
  • The T-Case Requires 2 of the C-Clips.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - C-Clip

What Vehicle Will This Fit?

  • Suzuki Samurai      1990 - 1995       All Models

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Transfer Case Counter Shaft
  • Direct Fit on Suzuki Samurai SJ413
  • Direct Replacement

What Will I Receive?

  • See Parts Diagram Above. 
  • Qty 1 - Part # 11  /  OE# 29131-80050

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Transfer Case Gear Shifter Outer Shift Rod SPRING
  • This Spring is part of the Shifter Mechanism and is the Outer Spring that holds the Smaller metal Balls against the Front Drive Shifting Shaft and the Reduction Shifting Shaft.
  • The Shifting Rods Require 2 of these Springs.
  • Direct Replacement

 

What Will I Receive?

  • Qty 1 - Spring (Outer)

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models

 

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Transfer Case Gear Shifter Inner Locating SPRING
  • This Spring is part of the Shifter Mechanism and is the Inner Spring that holds the Smaller metal Ball against the Front Drive Shifting Shaft.
  • The Shifting Rods Require 1 of these Springs.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Spring (Inner)

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Pin for the Transfer Case Reduction Fork Spring
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Pin

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Pin for the Transfer Case Front Drive Fork Spring
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Pin

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is a Suzuki OEM E-Ring for the Front drive Shifting Shaft in the Transfer Case
  • I also stock other Transfer Case Parts. (See T-Case Category in my eBay Store)
  • Direct Replacement

What Will I Receive?

  • Qty 1 - E-Ring

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These are the Suzuki OEM Metal Balls for the Transfer Case Front Drive & Reduction Shafts
  • These are part of the Shifter Mechanism and Requires 3 of these Smaller Balls
  • I also stock the larger Ball that is also Required. (See T-Case Category in my eBay Store)
  • Direct Replacement

What Will I Receive?

  • Qty 3 - Balls (small)

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models

 

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Large Metal Ball for the Transfer Case Front Drive & Reduction Shafts
  • This is part of the Shifter Mechanism and Requires 1 of these Larger Balls
  • I also stock the Smaller Balls that are also Required. (See T-Case Category in my eBay Store)
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Ball (large)

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models

 

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Transfer Case Spring Screw
  • This Screw hold the Gear Shifter Inner Locating SPRING & Gear Shifter Outer Shift Rod SPRING in place.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Screw

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Steering Column Rubber Seal
  • Seal the Bottom of the Steering Column to the Firewall.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Rubber Seal, Steering Column

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models
  • Suzuki SJ410          1980 - 1984       All Models

 

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Steering Column and Rag Joint Rebuild Kit
  • Total Steering Column Rebuild Kit
  • COMPLETE - Everything you Need!
  • Suzuki OEM Parts
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Steering Column - Assembled/Complete*
  • Qty 1 - Steering Wheel Nut
  • Qty 1 - Rubber Seal Flange
  • Qty 1 - Steering Flange and Bolt
  • Qty 1 - Steering U-Joint and Bolts
  • Qty 1 - Rag Joint
  • Qty 1 - Bolt/Nut/Washer Set for Rag Joint
  • Qty 4 - Spacers
  • Qty 2 - Plates for Rag Joint
    *Pre-Assembled Steering Column Parts
  • Housing for Steering Column Upper Steering Shaft Upper & Lower Grease Bushes Upper & Lower Circlips and Retainer Rings Steering Wheel Nut Rubber Seal Flange

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Jack Handle Clip & Grommet
  • Suzuki OEM Parts
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Clip
  • Qty 1 - Grommet (Large)
  • Qty 1 - Grommet (Small)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This part is the Lug Nut Stud that fits into the Drum and receives the lug nut after the wheel has been mounted.
  • Does One Rear Wheel
  • These are "Clipped" Studs for the REAR wheels on the 1980 - 1987 Models
  • FINISH: Zinc
  • OEM - Made by SUZUKI

What Will I Receive?

  • Qty 5 - Lug Nut Studs (Rear Wheels)

What Vehicle Will This Fit?

  • Suzuki Samurai       1988 - 1987       All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This part is the Lug Nut Stud that fits into the Drum and receives the lug nut after the wheel has been mounted.
  • Does Both Rear Wheels
  • These are "Clipped" Studs for the REAR wheels on the 1980 - 1987 Models
  • FINISH: Zinc
  • OEM - Made by SUZUKI

What Will I Receive?

  • Qty 10 - Lug Nut Studs (Rear Wheels)

What Vehicle Will This Fit?

  • Suzuki Samurai      1988 - 1987       All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This are the Drivers Side and Passengers Side Seat Belt COVERS.
  • These Covers go inside the Seat Belt Assembly Cavity and cover the backside of the Seat Belt.
  • Prevents Dirt and Obstructions from contacting Seat Belt
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Cover, RH Seatbelt
  • Qty 1 - Cover, LH Seatbelt

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the OEM Bulb for the Interior Dome Light 
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Bulb

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995     All Models
  • Suzuki SSJ410        1980 - 1984     All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the OEM Striker Plate for the Glove Box Door
  • Includes Screws
  • Note: Only fits Samurais 85-88 (have the round air vents in dash).
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Striker Plate
  • Qty 2 - Screws

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1988        All Models

General Information

  • New in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Universal Trim Clip Set
  • 60 Piece Set
  • Variety of Sizes for all Requirements
  • Attaches Door Panels, Fender Flares, Rocker Trim, Carpet Clips, Bumper Clips and Other Parts.
  • INCLUDES the Front & Rear Bumper End Cap Clips.

What Will I Receive?

  • Qty     -    Description   - Color  -  Head Dia.   x    Shaft Diameter (Open/Closed)   x    Shaft Length
  • Qty 6 -       Push Pin        Gray          17mm       x        7mm / 10mm                               x      11mm
  • Qty 6 -       Push Pin        Gray          14mm       x        7mm / 9mm                                 x       9mm
  • Qty 6 -       Push Pin        Gray          16mm       x       6.5mm / 11mm                             x      12mm
  • Qty 6 -       Push Pin        Black         13mm       x       5.5mm / 6.5mm                           x        8mm
  • Qty 6 -       Push Pin        Black         13.5mm    x         6mm / 8mm                               x      18mm
  • Qty 10 - Metal “Slip-On” Screw Grommet
  • Qty   8 - Door Panel Installation Clips (Comes with Both Pieces - Panel & Door)
  • Qty   5 - Carpet Clips
  • Qty   4 - Bumper Cap Clips

What Vehicles Will This Fit?

  • Suzuki Samurai      1986 - 1995       All Models
  • Suzuki SJ410          1980 - 1984       All Models

General Information

  • New in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Universal Trim Clip Set
  • 110 Piece Set
  • Variety of Sizes for all Requirements
  • Attaches Door Panels, Fender Flares, Rocker Trim and many other parts

What Will I Receive?

  • Qty 110 - Variety of Trim Clips and Pins

What Vehicles Will This Fit?

  • Suzuki Samurai      1986 - 1995        All Models
  • Suzuki SJ410          1980 - 1984       All Models

General Information

  • All parts Ship from Atlanta, GA
  • NEW in the Original Packaging

What is This Part?

  • This is the Exterior Rear Door Handle for the Tin Top Model of Samurai
  • Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Rear Door Handle (Exterior)

What Will I Receive?

  • Suzuki Samurai    1985 - 1995    All Models
  • Suzuki SJ410        1980 - 1984    All Models

General Information

  • New in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These are the Bolts for the Door & Tailgate Hinges.
  • Comes with the Exact Quantity Needed to Replace ALL Door & Tailgate Hinge Screws.
  • Makes the Appearance more Rugged
  • Replaces the Hard-To-Remove Screws
  • NOTE: Metal Finish May Vary between Bright Zinc or Phosphate (Phosphate Shown) / (we get whichever Suzuki sends) 
  • Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

  • Qty 26 - Hinge Bolts, Door & Tailgate

What Will this Fit?

  • Suzuki Samurai      1985 - 1995       All Models
  • Suzuki SJ410          1980 - 1984       All Models

General Information

  • New in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These are the Bolts for the Door Hinges.
  • Comes with the Exact Quantity Needed to Replace ALL Door Hinge Screws.
  • Makes the Appearance more Rugged
  • Replaces the Hard-To-Remove Screws
  • NOTE: Metal Finish May Vary between Bright Zinc or Phosphate (Phosphate Shown) / (we get whichever Suzuki sends) 
  • Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

  • Qty 16 - Hinge Bolts, Door (4 per Hinge)

What Will this Fit?

  • Suzuki Samurai      1985 - 1995       All Models
  • Suzuki SJ410          1980 - 1984       All Models

General Information

  • New in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These are the Bolts for the Tailgate Hinges.
  • Comes with the Exact Quantity Needed to Replace ALL Tailgate Hinge Screws.
  • Makes the Appearance more Rugged
  • Replaces the Hard-To-Remove Screws
  • NOTE: Metal Finish May Vary between Bright Zinc or Phosphate (Phosphate Shown) / (we get whichever Suzuki sends) 
  • Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

  • Qty 10 - Hinge Bolts, Tailgate (5 per Hinge)

What Will this Fit?

  • Suzuki Samurai      1985 - 1995       All Models
  • Suzuki SJ410          1980 - 1984       All Models

General Information

  • New in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Thermostat Cap for the Samurai.
  • Fits the Carb and EFI Engines.
  • Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Thermostat Cap/Housing

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models

General Information

  • New in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Themostat Cap and Gasket for the Samurai.
  • Fits the Carb and EFI Engines.
  • Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Thermostat Cap/Housing
  • Qty 1 - Gasket

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Bolt for the Front Brake Caliper Hydraulic Hose Attachment.
  • Connects the Brake Hoses to the Calipers
  • Does Both Brake Calipers
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Bolts  (1 per hose)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995       All Models

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Emergency Brake Lever, Mounting Plate, Rubber Mounting Grommet and Cable #1
  • Comes with the #1 Cable!
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Emergency Brake Lever
  • Qty 1 - Mounting Plate
  • Qty 1 - Rubber Mounting Grommet
  • Qty 1 - Cable #1

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models

General Information

  • Stocked & Shipped From Atlanta, GA
  • New in the Original Packaging

What is This Part?

  • This is the Suzuki OEM Complete Brake Hose Replacement Set.
  • Comes with BOTH Front Brake Hoses and Rear Brake Hose.
  • Direct Replacement for Years 1988.5 thru 1995
  • I also carry the the Brake Hose Set for years 1986 thru 1988 in my eBay Store!

What Will I Receive?

  • Qty 2 - Front Brake Hoses     (Fits LH side & RH side)
  • Qty 1 - Rear Brake Hoses       (Fits LH side & RH side)

What Vehicle Will This Fit?

  • Suzuki Samurai      1988.5 - 1995       All Models

General Information

  • Stocked & Shipped From Atlanta, GA
  • New in the Original Packaging

What is This Part?

  • This is the Suzuki OEM Complete Brake Hose Replacement Set.
  • Comes with BOTH Front Brake Hoses and BOTH Rear Brake Hoses.
  • Direct Replacement for Years 1986 thru 1988
  • I also carry the the Brake Hose Set for years 1988.5 thru 1995 in my eBay Store!

What Will I Receive?

  • Qty 2 - Front Brake Hoses (Fits LH side & RH side)
  • Qty 2 - Rear Brake Hoses  (Fits LH side & RH side)

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1988       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Clutch Cable Repair Kit (Nut,Spring,Pin,Washer) to fix missing or worn out pieces on the cable attachment points.
  • Suzuki OEM Parts
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Clutch Cable Repair Kit (Nut,Spring,Pin,Washer)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Rear Axle Housing PLUS the Rear Axle Bearing and Oil Seal Repair Kit.
  • It does BOTH SIDES.
  • You get everything you need to complete the repair on both axles.
  • Contains Genuine Suzuki OEM Parts & Quality After-market Parts
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Rear Axle Housing
  • Qty 2 - Bearings (LH & RH)
  • Qty 2 - Oil Seals (LH & RH)
  • Qty 2 - Retainer Ring, Oil Seals (LH & RH)
  • Qty 2 - Protectors, Oil Seals (LH & RH)
  • Qty 8 - Stud Bolts
  • Qty 1 - Breather Cap Assembly
  • Qty 1 - Filler Plug
  • Qty 1 - Drain Plug & Gasket

What Vehicle Will This Fit?

  • Suzuki Samurai          1985 - 1995     All Models

 

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These are the C-Clips for the RH & LH Front Axles
  • Genuine Suzuki OEM Parts
  • Direct Replacement

What Will I Receive?

  • Qty 2 - C-Clips

What Vehicle Will This Fit?

  • Suzuki Samurai          1985 - 1995     All Models
  • Suzuki SJ410              1980 - 1984     All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Front Axle Housing PLUS the Front Axle Knuckles, Bearings & Oil Seal Repair Kit.
  • Includes the Knuckle Bearings PLUS the Axle Bearings
  • Includes the Filler/Drain Plugs & Breather Cap Assembly
  • Includes the Steering Knuckle Rebuild Kit plus the Complete Front Axle Rebuild Kit.
  • Both Sides Included
  • Contains Genuine Suzuki OEM Parts & Quality Aftermarket Parts
  • Direct Replacement

What Will I Receive?

  • Qty 1 - FrontAxle Housing with Filler/Drain Plugs & Breather Assembly
  • Qty 2 - Front Axle Inner Bearings
  • Qty 2 - Front Axle Outer Bearings
  • Qty 2 - Front Axles Inner Oil Seals
  • Qty 2 - Front Axles Outer Oil Seals
  • Qty 4 - Steering Knuckle Bearings
  • Qty 4 - Shims for King Pins
  • Qty 2 - Steering Knuckle Oil Seals
  • Qty 2 - Steering Knuckle Felts
  • Qty 4 - Steering Knuckle Felt Retainer Plates
  • Qty 4 - Steering Knuckle Oil Seal Cover Plates
  • Qty 2 - C-Clips, Front Axles
  • Qty 2 - Lock Washers
  • Qty 2 - Star Washers
  • Qty 4 - Nuts

What Vehicle Will This Fit?

  • Suzuki Samurai         1985-1995      All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Front Axle Housing.
  • Includes Drain Plug & Fill Plug
  • OEM
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Front Axle Housing
  • Qty 1 - Drain Plug
  • Qty 1 - Fill Plug

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Fuel Filler Inlet Hose Kit
  • Comes with Gas Filler Hose & Vapor Hose
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Gas Filler Hose
  • Qty 1 - Vapor Hose
  • Qty 4 - Clamps
  • Qty 1 - Gas Cap

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995   All Models
  • Suzuki SJ410          1980 - 1984   All Models

 

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Carburetor Stud Bolt for the Air Breather Case
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Stud Bolt

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995   All Models
  • Suzuki SJ410          1980 - 1984   All Models

 

General Information

  • New in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Rubber Seal for the Front Edge of the Hard Top, where the Hard Top Meets the Windshield Frame
  • Goes 75” Long
  • See # 2 on Diagram
  • NOTE:
  • Please look carefully at this item to varify that it will fit on your particular brans of Hardtop.

What Will I Receive?

  • Qty 1 - Rubber Seal

What Vehicle Will This Fit?

  • Suzuki Samurai      1985- 1995        Soft Top
  • Suzuki SJ410          1980- 1984        Soft Top

General Information

  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Rubber Seal for the Hardtop.
  • Seals the Hardtop where it joins against the Targa Bar
  • 55” Long
  • See # 11 on Diagram
  • Has Self Adhesive Backing
  • Comes with Adhesive Pre-applied but additional adhesive may need to be applied on bottom of strip if the hardtop is to be taken on and off. 
    • NOTE:
    • Please look carefully at this item to verify that it will fit on your particular Brand & Style of Hardtop.

What Will I Receive?

  • Qty 1 - #11 Rubber Seal

What Vehicle Will This Fit?

  • Suzuki Samurai      1985- 1995        Soft Top
  • Suzuki SJ410         1980- 1984        Soft Top

 

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Inner & Outer Glass Scrapes for both windows.
  • These fit on the both sides of the glass
  • Both have an Upgraded Felt Face to eliminate glass stutter when going up and down.
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Outer Glass Scrapes
  • Qty 2 - Inner Glass Scrapes

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the OEM Complete Weather Stripping / Rubber Replacement Kit for the Samurai Tin-top Model.
  • Does your Samurai clatter like a bag of dimes in a dryer? Then make it sound as quiet as the day it rolled off the lot with this 22 piece OEM Weather Strip & Seal Kit.
  • Suzuki OEM Parts
  • NOTE: The Rear Door Seal may require trim to the correct length.
  • Direct Replacement

It'll quiet down and seals the following areas:

  • Passengers Side Door Opening
  • Drivers Side Door Opening
  • Rear Door Opening
  • Drivers Side Glass
  • Passenger Side Glass
  • Upper Windshield Frame
  • Drivers Side Door Rail
  • Passenger Side Door Rail
  • Floor Drain Plugs

What Will I Receive?

  • Qty 1 - Drivers Door Opening Weather Strip
  • Qty 1 - Drivers Door Glass Run
  • Qty 1 - Drivers Door Glass Scrape - Inner
  • Qty 1 - Drivers Door Glass Scrape - Outer
  • Qty 1 - Drivers Door - Interior Cavity Seal
  • Qty 1 - Passengers Door Opening Weather Strip
  • Qty 1 - Passengers Door Glass Run
  • Qty 1 - Passengers Door Glass Scrape - Inner
  • Qty 1 - Passengers Door Glass Scrape - Outer
  • Qty 1 - Passengers Door - Interior Cavity Seal
  • Qty 1 - Rear Door Weather Strip
  • Qty 1 - Upper Windshield Frame Weather Strip

Plus

  • Qty 1 - Drivers Side Door Rail Seal
  • Qty 1 - Passengers Side Door Rail Seal
  • Qty 6 - Large Floor Drain Plugs
  • Qty 2 - Small Floor Drain Plugs

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • New in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Rubber Seals for the Hardtop Shell.
  • Seals the Hardtop Shell where it sits down against the Bed Walls.
  • Comes with 2 Pieces (1 for each side)
  • 5” Long x 1.25” Wide x 1/8” Thick
  • #22 & #23 on Diagram in Pictures
  • Has Self Adhesive Backing
  • Comes with Adhesive Pre-applied but additional adhesive may need to be applied on bottom of strip if the hardtop is to be taken on and off. 

What Will I Receive?

  • Qty 2 - Rubber Seal

What Vehicle Will This Fit?

  • Suzuki Samurai      1985- 1995        Soft Top
  • Suzuki SJ410         1980- 1984        Soft Top

 

General Information

  • New in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Differential Flange.
  • 26 SPLINE
  • This part connects the Differentials to the Driveshafts
  • Fits Front & Rear Driveshafts on Suzuki Samurai’s 1990-1995
  • Genuine Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Differential Flange (Front/Rear)

What Vehicle Will This Fit?

  • Suzuki Samurai      1990 - 1995       All Models

 

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Bearing Lock Plate and Bearing Adjuster.
  • These parts adjust the pressure that is applied to the Front & Rear Differential Bearings
  • Fits the Front & Rear Differentials
  • Comes with Installation Bolt!
  • Genuine Suzuki OEM Parts
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Adjuster, Bearing
  • Qty 1 - Lock Plate, Bearing
  • Qty 1 - Bolts, Bearing Lock Plate

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models

General Information

  • New in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Bearing Lock Plate.
  • This Plate locks the Bearing Adjuster in place so it can’t move
  • Fits the Front & Rear Differentials
  • Comes with Installation Bolt!
  • Genuine Suzuki OEM Parts
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Lock Plate, Bearing
  • Qty 1 - Bolts, Bearing Lock Plate

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Rear Differential Side Gears
  • Fits 1985 thru 1995
  • Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Rear Differential Side Gears

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

General Information

  • New in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Differential Pinion Bearing (Front Bearing)
  • Size: 30 x 72 x 20.75
  • NSK Brand
  • Made in JAPAN
  • Genuine Suzuki OEM Parts
  • Direct Replacement

What Will I Receive?

  • Qty 1 - OE# 09265-30018

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models

General Information

  • New in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Rear Differential Pinion Bearing (Rear Bearing)
  • KOYO Brand
  • Made in JAPAN
  • Genuine Suzuki OEM Parts
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Bearing OE# 09265-35011

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Radiator Reservoir Hose.
  • The Hose goes from the Radiator Filler Throat to the Reservoir Tank
  • Genuine Suzuki OEM Hoses
  • Direct Replacement

What Will You Receive?

  • Qty 1 - Long Hose (Radiator to Reservoir Tank)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These are the Radiator Reservoir/Over-flow Hoses.
  • The Long Hose goes from the Radiator Filler Throat to the Reservoir Tank
  • The Short Hose goes inside the Reservoir Tank
  • Genuine Suzuki OEM Hoses
  • Direct Replacement

What Will You Receive?

  • Qty 1 - Long Hose (Radiator to Reservoir Tank)
  • Qty 1 - Short Hose (Reservoir Tank)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These are Suzuki OEM Heater Line Plugs
  • Temporarily or Permanently Block Off the Water Lines going to and from the Heater Core.
  • Genuine Suzuki OEM Part

            Size

    • OD- 21 mm / .82 in.
    • ID-   13 mm / .51 in.
    • Length - 35 mm / 1.37 in.

What Will I Receive?

  • Qty 2 - Plugs, Heater Line

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This Suzuki OEM part attaches to the engine compartment firewall and is a valve that connects the radiator water line to the heater core. The valve can be opened and closed by use of a cable that is controlled at the Heater Panel thus allowing hot water to flow to the heater core to produce hot air.
  • This is a very hard to find Part. Significantly outlasts after-market valves because of it’s superior construction.
  • Genuine Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Heater Core Valve

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Model

Covers the Following Vehicles

Suzuki/Maruti - Samurai & Gypsy

NOTE: The Maruti Gypsy is made by Suzuki and is the equivalent of a Suzuki SJ413 Samurai. If you have been wanting a Suzuki Samurai Parts Catalog but haven't wanted to pay the high price then this might be what your looking for. Even though this is a RHD Catalog it only affects a small portion of the parts and even in those instances it will often contain the LHD information too.

Manual Contains the Following Information

All Part Numbers

Part Descriptions

Parts Diagrams

Covers the Following Vehicles

Suzuki/Maruti - Samurai & Gypsy

NOTE: The Maruti Gypsy is made by Suzuki and is the equivalent of a Suzuki SJ413 Samurai. If you have been wanting a Suzuki Samurai Parts Catalog but haven't wanted to pay the high price then this might be what your looking for. Even though this is a RHD Catalog it only affects a small portion of the parts and even in those instances it will often contain the LHD information too.

Manual Contains the Following Information

All Part Numbers

Part Descriptions

Parts Diagrams

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Weld-On Tow Ring that Mounts to the Front Cross Member.
  • Come Primed and Ready to Prep for Paint!
  • NOTE: The Studs can be Removed Leaving Only the Tow Ring.

What Will I Receive?

  • Qty 1 - Weld-On Tow Ring

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

What is This?

  • This is the Suzuki OEM Plastic Grille Nut.
  • These parts snap into the 4 square holes located in the Hood Member Uprights. These are situated directly behind the Grille so that the Grille can be attached to the Hood Member Supports with screws.
  • Direct Replacement

What Will I Receive?

  • Qty 4 - Plastic Grill Nuts

What Vehicle Does This Fit?

  • Suzuki Samurai    1992 - 1995

What is This Part?

  • This is the Suzuki OEM  “S” Grill Emblem for the Suzuki Samurai with the new style grill.
  • Mirrored Chrome Finish
  • Peel-Off Adhesive Backing
  • Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Suzuki “S” Emblem

What Vehicle Will This Fit?

  • Suzuki Samurai   1990 - 1995    All Models
  • Suzuki SaJ413     1990 - 1995    All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is a Suzuki OEM Rear Axle for the RH side or Passengers side.
  • This is the Short Axle with 26 Splines.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Rear Axle (RH) - Short Axle

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

What is This Part?

  • This is Suzuki OEM Front Grill and other OEM Parts (See Below)
  • The Front Grill is made from High Impact Plastic and is pre-finished in a Gray Metallic.
  • Includes Backing Mesh & Emblem
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Grill
  • Qty 1 - Grill Mesh
  • Qty 1 - Suzuki "S" Emblem

What Vehicles Will This Fit?

  • Suzuki Samurai    1992 - 1995

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is a New Style Grill Retro-Fit kit made up of a OEM Front Grill and other OEM Parts (See Below)
  • Includes everything you need to change your "old style" Grill to a "new style" Grill
  • The Front Grill is made from High Impact Plastic and is pre-finished in a Gray Metallic.
  • The Front Support Brackets are pre-finished in Satin Black

What Will I Receive?

  • Qty 1 - Grill
  • Qty 1 - Grill Mesh
  • Qty 1 - Suzuki "S" Emblem
  • Qty 2 - Support Brackets
  • Qty 4 - Plastic Screw Nuts
  • Qty 6 - Grill Attachment Screws
  • Qty 4 - Support Bracket Attachment Screws

What Vehicles Will This Fit?

  • Suzuki Samurai    1985 - 1991
  • Suzuki SJ410        1980 - 1984

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Front Bumper, Both Front Bumper End Caps, Front Blinkers & Install Clips.
  • Front Bumper is pre-painted black
  • Includes Bumper End Caps plus Installation Clips & Screws.
  • Includes Front Turn Lights
  • Turn Key Install
  • Direct Replacement
  • NOTE: This bumper is formed via a stamped metal process and has surface imperfections that are typical to this process. While acceptable for normal Samurais, if you are building a show vehicle this bumper may not meet your needs.

What Will I Receive?

  • Qty 1 - Front Bumper    (OEM)
  • Qty 1 - LH Protector Cap (After-Market)
  • Qty 1 - RH Protector Cap (After-Market)
  • Qty 1 - LH Blinker Light (After-Market)
  • Qty 1 - RH Blinker Light (After-Market)
  • Qty 1 - Installation Clip Set

What Vehicles Will This Fit?

  • Suzuki Samurai 1985 - 1995
  • Suzuki SJ410     1980 - 1984

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Front Bumper and Both Front Bumper End Caps.
  • This is an OEM Front Bumper that was made by Suzuki that is pre-painted black
  • Comes with the after-market Bumper Corner Caps for both sides
  • Includes the install clips for the End Caps
  • Direct Replacement
  • NOTE: This bumper is formed via a stamped metal process and has surface imperfections that are typical to this process. While acceptable for normal Samurais, if you are building a show vehicle this bumper may not meet your needs.

What Will I Receive?

  • Qty 1 - Front Bumper    (OEM)
  • Qty 1 - LH Protector Cap (After-Market)
  • Qty 1 - RH Protector Cap (After-Market)
  • Qty 1 - Installation Clip Set

What Vehicles Will This Fit?

  • Suzuki Samurai 1985 - 1995
  • Suzuki SJ410     1980 - 1984

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Lexington, KY

What is This Part?

  • These are the Rubber Covers that goes over the metal foot plate on the Clutch & Brake Pedals
  • Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Cover, Clutch
  • Qty 1 - Cover, Brake

What Vehicle Will This Fit?

  • Geo Tracker           1989 - 1998       All Models
  • Suzuki Sidekick     1989 - 1998       All Models

What is This Part?

  • This is the Front Drive Shaft, #2 Propeller, that goes from the Transfer Case to the Front Differential
  • FITS ALL MODELS from 1985 thru 1995.
  • Large and Small Bolt Pattern Flanges Included.
  • Simply install the Flange you require on Drive Shaft.
  • Suzuki OEM Drive Shaft
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Front Drive Shaft (OEM)
  • Qty 1 - Small Bolt Pattern Flange 1985 - 1989 (after-market)
  • Qty 1 - Large Bolt Pattern Flange 1990 - 1995 (after-market)

What Vehicle Will This Fit?

  • Small Flange  -  Suzuki Samurai   1985 - 1989         All Models
  • Large Flange  -  Suzuki Samurai    1990 - 1995        All Models

What is This Part?

  • This is the Intermediate Drive Shaft, #1 Propeller, that goes from the Transmission to the Transfer Case.
  • FITS ALL MODELS from 1986 thru 1995.
  • Large and Small Bolt Pattern Flanges Included.
  • Simply install the Flange you require on Drive Shaft.
  • Suzuki OEM Drive Shaft
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Intermediate Drive Shaft
  • Qty 1 - Small Bolt Pattern Flange 1985 - 1989
  • Qty 1 - Large Bolt Pattern Flange 1990 - 1995

What Vehicle Will This Fit?

  • Small Flange  -  Suzuki Samurai   1985 - 1989         All Models
  • Large Flange  -  Suzuki Samurai    1990 - 1995        All Models

What is This Part?

  • This is the Suzuki OEM Fuel Filler Hose that goes from the Filler Cap throat to the Gas Tank.
  • Comes with Both Required Clamps
  • Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Inlet Hose
  • Qty 1 - Upper Hose Clamp (2.25”)
  • Qty 1 - Lower Hose Clamp (2”)

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995   All Models
  • Suzuki SJ410          1980 - 1984   All Models

 

What is This Part?

  • This is the Suzuki OEM Oil Pan Drain Plug & Washer
  • Made by SUZUKI
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Drain Plug
  • Qty 1 - Washer

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995   All Models
  • Suzuki SJ413          1985 - 1995   All Models
  • Suzuki Sidekick     1989 - 1998   All Models

 

What is This Part?

  • This is the Suzuki OEM Crank Shaft Timing Pully Key
  • MAX H-7mm / MIN H-4mm
  • L-15mm
  • W-5mm
  • Made by SUZUKI
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Key

What Vehicle Will This Fit?

  • Suzuki Sidekick     1989 - 1998   All Models
  • Geo Tracker           1989 - 1998   All Models

What is This Part?

  • These are the Suzuki OEM Bumpers for the Rear Leaf Springs
  • Both Sides Included
  • Made by SUZUKI
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Rear Leaf Spring Bumpers

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995   All Models
  • Suzuki SJ413          1985 - 1995   All Models

What is This Part?

  • These are the Suzuki OEM Bumpers for the Front Leaf Springs
  • Both Sides Included
  • Made by SUZUKI
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Front Leaf Spring Bumpers

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995   All Models
  • Suzuki SJ413          1985 - 1995   All Models

What is This Part?

  • These Suzuki OEM parts are the Leaf Spring Spacers for the Front & Rear Shackles
  • Made by SUZUKI
  • Direct Replacement

What Will I Receive?

  • Qty 4 - Spacers, Leaf Spring Bolts

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995   All Models
  • Suzuki SJ413          1985 - 1995   All Models
  • Suzuki Sj410          1980 - 1984   All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These Suzuki OEM parts are the Leaf Spring Bolts for the Front & Rear Shackles
  • Hardened Grade 7 Bolts and Nuts
  • Made by SUZUKI
  • Direct Replacement

What Will I Receive?

  • Qty 4 - Bolts (Grade 7)
  • Qty 4 - Nuts (Grade 7)
  • Qty 4 - Lock Washers

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995   All Models
  • Suzuki SJ413          1985 - 1995   All Models
  • Suzuki Sj410          1980 - 1984   All Models

What is This Part?

  • These Suzuki OEM parts are the Leaf Spring Bolts & Spacers Front & Rear Shackles
  • Hardened Grade 7 Bolts and Nuts
  • Made by SUZUKI
  • Direct Replacement

What Will I Receive?

  • Qty 4 - Bolts (Grade 7)
  • Qty 4 - Nuts (Grade 7)
  • Qty 4 - Lock Washers
  • Qty 4 - Spacer

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995   All Models
  • Suzuki SJ413          1985 - 1995   All Models
  • Suzuki Sj410          1980 - 1984   All Models

What is This Part?

  • These are the Suzuki OEM Front Leaf Springs Seats/Plate.
  • These are used to Attach the Front Leaf Springs to the Front Axle.
  • LH & RH Sides Included!
  • Made by SUZUKI
  • Direct Replacement

What Will I Receive?

  • Qty 1 - LH Front - Leaf Spring Plate
  • Qty 1 - RH Front - Leaf Spring Plate

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995   All Models
  • Suzuki SJ413          1985 - 1995   All Models

What is This Part?

  • These are the Suzuki OEM Sway Bar Connecting Plates & Bushings.
  • If you still have the Original Bushings on your Samurai then you definately need these!
  • Better Handling / Smoother Ride
  • Includes the Attachment Bolts!
  • Made by SUZUKI
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Cushions (Sway Bar)
  • Qty 2 - Plates
  • Qty 4 - Bolts

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995   All Models
  • Suzuki SJ413          1985 - 1995   All Models

General Information

  • Stocked & Shipped From - USA
  • NEW in the Original Packaging
  • Suzuki OEM Part

What is this Part?

  • This is the Suzuki OEM Passenger Side Rear Brake Cylinder for Suzuki Samurai 1988.5 - 1995
  • This hydraulic cylinder activates the lever assembly to engage the rear brake shoes.

What Will I Receive?

  • Qty 1 - Rear Brake Cylinder (Passenger Side)

What Vehicle Will This Fit?

  • Suzuki Samurai      1988.5 - 1995       All Models
  • Suzuki SJ413           1988.5 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These are the Suzuki OEM Front and Rear Shocks.
  • Made by Monroe specifically for Suzuki
  • Direct Replacement

What Will I Receive?

  • Qty 1 - LH Front
  • Qty 1 - RH Front
  • Qty 1 - LH Rear
  • Qty 1 - RH Rear

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995   All Models
  • Suzuki SJ413          1985 - 1995   All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This Suzuki OEM part attaches to your existing washer tank and pumps water to the washer nozzle.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Pump

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This part is the LH Protector Cap that attaches to the Passenger side of the Front Bumper / Metal BarPre-colored Heavy Black Plastic
  • Attachment Clips can be purchased in my Ebay Store.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - LH Protector Cap (Passengers Side)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Front Bumper, Front Bumper End Caps and Lights.
  • Front Bumper is pre-painted black
  • Comes with the install clips & screws for the Bumper End Caps
  • Suzuki OEM Parts
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Front Bumper
  • Qty 2 - Front Turn Lights (LH & RH)
  • Qty 1 - LH Protector Cap (Drivers Side)
  • Qty 1 - RH Protector Cap (Passengers Side)

 

Fitment

  • Suzuki Samurai       1985 - 1995       All Models
  • Suzuki SJ410           1980 - 1984      All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Front Bumper and Both Front Bumper End Caps.
  • This is an OEM Front Bumper that was made by Suzuki that is pre-painted black and comes with the Bumper Corner Caps for both sides and the install clips.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Front Bumper
  • Qty 1 - LH Protector Cap (Drivers Side)
  • Qty 1 - RH Protector Cap (Passengers Side)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This part is the RH Protector Cap that attaches to the Passenger side of the Front Bumper / Metal Bar
  • Pre-colored Heavy, Black Plastic
  • Attachment Clips can be purchased in my Ebay Store.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - RH Protector Cap (Passengers Side)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM RH & LH Front Bumper Caps that attach to the ends of the Front Bumper
  • Made from Pre-colored Heavy Black Plastic
  • Includes the Attachment Clips & Screw
  • Suzuki OEM
  • Direct Replacement

What Will I Receive?

  • Qty 1 - LH End Cap, Front Bumper
  • Qty 1 - RH End Cap, Front Bumper
  • Qty 6 - Attachment Clips
  • Qty 2 - Attachment Screws

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

What is This Part?

  • This is the Suzuki OEM Fuel Filler Inlet Seal / Gasket  for the Suzuki Samurai.ki OEM
  • Fits the Carburated & Fuel Injected Models.
  • Made by SUZUKI
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Gasket (Fuel Filler Inlet)

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995   All Models
  • Suzuki SJ413           1985 - 1995   All Models

What is This Part?

  • This is the Complete Suzuki OEM “Electronic Fuel Injection Gas Tank Kit.
  • You’ll get an EFI Gas Tank, an “In-Tank” High Pressure Fuel Pump and a Sending Unit.
  • This is all plug and play* for the 1991-1995 Suzuki Samurai’s. (EFI Engines Only)
  • This is also a great kit if you’re converting your existing Samurai to Fuel Injection.
  • Made by SUZUKI
  • Direct Replacement
  • * NOTE: Fuel Pump connectors are no longer made like the 91-95 Samurai. The new connection uses band clamps or wire clamps. If your flexible fuel line hoses going to the fuel pump are still good then simply cut the original connector off the end and slide onto fuel pump line, then secure with clamp.

What Will I Receive?

  • Qty 1 - EFI Fuel Tank
  • Qty 1 - Sending Unit
  • Qty 1 - Gasket, Sending Unit
  • Qty 1 - In-Tank Fuel Pump
  • Qty 1 - Gasket, Fuel Pump

What Vehicle Will This Fit?

  • Suzuki Samurai      1991 - 1995   All Models
  • Suzuki SJ413          1991 - 1995   All Models

What is This Part?

  • This is the New Suzuki OEM Fuel Pump that goes inside the EFI fuel tanks.
  • * NOTE: Fuel Pump connectors are no longer made like the 91-95 Samurai.
  • The new connection uses band clamps or wire clamps.
  • If your flexible fuel line hoses going to the fuel pump are still good then simply cut the original connector off the end and slide onto fuel pump line, then secure with clamp.
  • Made by SUZUKI
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Fuel Pump
  • Qty 1 - Gasket for Fuel Pump

What Vehicle Will This Fit?

  • Suzuki Samurai      1991 - 1995   All Models
  • Suzuki SJ413          1991 - 1995   All Models

Price

$119.99 $105.99

Quantity

- +

Total

$119.99 $105.99

Sale w/ Free Shipping!

What is This Part?

  • This is the Suzuki OEM Aluminum Valve Cover Kit for the G13A & G13BA Engine
  • This will fit Suzuki Samurai 1985 - 1995.
  • This cover has minor changes from the original cover. Look at pictures for details.

 

What Will I Receive?

  • Qty 1 - Valve Cover, Aluminum
  • Qty 1 - Oil Fill Cap
  • Qty 4 - Washers, Valve Cover
  • Qty 1 - Gasket, Valve Cover

Price

$13.99 $12.99

Quantity

- +

Total

$13.99 $12.99

Sale w/ Free Shipping!

What is This Part?

  • This is the Suzuki OEM PVC Valve, Vaccum Hose Clips and 3-Way Switch
  • Made by SUZUKI
  • Direct Replacement

What Will I Receive?

  • Qty 1 - PVC Valve
  • Qty 2 - Vacuum Hose Clips
  • Qty 1 - 3 Way Switch

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995   All Models
  • Suzuki SJ413          1985 - 1995   All Models

Price

$115.99 $99.99

Quantity

- +

Total

$115.99 $99.99

Sale w/ Free Shipping!

What is This Part?

  • This is the Suzuki OEM Valve Cover for the G13A & G13BA Engine.
  • Please look at pictures carefully as Suzuki has made minor changes to Cover.
  • NOW INCLUDES Valve Cover Gasket !
  • Made by SUZUKI
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Valve Cover
  • Qty 1 - Gasket, Valve Cover
  • Qty 1 - Oil Fill Cap
  • Qty 4 - Bolts, Valve Cover
  • Qty 4 - Washers, Valve Cover

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995   All Models
  • Suzuki SJ413          1985 - 1995   All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Floor Pan for the Passenger's Side (RH).
  • Comes Pre-primed in Gray Primer

Caution: Read Below Statements

Note: This Floor Pan is made for a RHD Samurai but can be modified to fit the LHD Samurai. Affects Seat Tower Bracket & Connection Locations Only.Floor Pan size and Cut Pattern are the same for LHD & RHD

Inspect Pictures and Ask Questions before purchasing because these parts can’t be returned.

Condition Statement: Floor Pans are new sheet metal body parts and as such may have minor dings from shipping via sea freight. All sheet metal body parts must be prep’d prior to final painting. Special Notice: This part requires the use of welding to be properly installed.

Non-Returnable/ Sale is Final

 

What Will I Receive?

  • Qty 1 - Floor Pan (Passenger Side - RH)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Floor Pan for the Driver's Side (LH).
  • Comes Pre-primed in Gray Primer
  • Floor Pan size and Cut Pattern are the same for LHD & RHD

Caution: Read Below Statements

Note: This Floor Pan is made for a RHD Samurai but can be modified to fit the LHD Samurai. Affects Seat Tower Bracket & Connection Locations Only. Floor Pan size and Cut Pattern are the same for LHD & RHD

Inspect Pictures and Ask Questions before purchasing because these parts can’t be returned.

Condition Statement: Floor Pans are new sheet metal body parts and as such may have minor dings from shipping via sea freight. All sheet metal body parts must be prep’d prior to final painting. Special Notice: This part requires the use of welding to be properly installed.

Non-Returnable/ Sale is Final

What Will I Receive?

  • Qty 1 - Floor Pan (Driver Side - LH)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410            1980-1984        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These Suzuki OEM parts makeup the Complete Targa Bar.
  • These are the Drivers Side (LH) and Passenger Side (RH) Uprights or Vertical Pieces & Center Section.
  • Comes With Trim Garnish for Both Sides!
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Targa Bar LH Vertical Panel
  • Qty 1 - Targa Bar RH Vertical Panel
  • Qty 1 - Targa Bar Center Section
  • Qty 2 - Trim Garnish

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

READ THIS:    Condition Statement - "Metal Body Parts”

This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.