Cart

General Information

• NEW in the Original Packaging
• Stocked & Shipped From - LEXINGTON, KY

What is This Part?

• This part is the Lug Nut Stud that fits into the Drum and receives the lug nut after the wheel has been mounted.
• Does One Rear Wheel
• These are "Clipped" Studs for the REAR wheels on the 1980 - 1987 Models
• FINISH: Zinc
• OEM - Made by SUZUKI

What Will I Receive?

• Qty 5 - Lug Nut Studs (Rear Wheels)

What Vehicle Will This Fit?

• Suzuki Samurai       1988 - 1987       All Models
• Suzuki SJ410           1980 - 1984       All Models

General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is the Suzuki OEM Front Spindle This will do one side. NOTE: Already has Brass Bushing pressed into place. Direct Replacement What Will I Receive? Qty 1 – Front Spindle with Brass Bushing pressed into place....

General Information

• New in the Original Packaging - (Unless Bulk Packed)
• Stocked & Shipped From - LEXINGTON, KY
• Genuine Suzuki OEM Part 

What is This Part?

• This is a Suzuki OEM Complete Front Hub.
• It Will Fit on Either Side of the Front Axle.
• Includes: Wheel Studs & Lug Nuts
• BONUS - Comes With an 5 Extra Lug Nuts

What Will I Receive?

• Qty 1 - Hub, Front Axle
• Qty 5 - Wheel Studs
• Qty 10 - Lug Nuts
  

What Vehicle Will This Fit?

• Suzuki Samurai      1985 - 1995       All Models
• Suzuki SJ413          1985 - 1995       All Models
• Suzuki SJ410         1980 - 1984      All Models

General Information

• NEW in the Original Packaging
• Stocked & Shipped From - LEXINGTON, KY

What is This Part?

• This part is the Lug Nut Stud that fits into the Drum and receives the lug nut after the wheel has been mounted.
• Does Both Rear Wheels
• These are "Clipped" Studs for the REAR wheels on the 1980 - 1987 Models
• FINISH: Zinc
• OEM - Made by SUZUKI

What Will I Receive?

• Qty 10 - Lug Nut Studs (Rear Wheels)

What Vehicle Will This Fit?

• Suzuki Samurai      1988 - 1987       All Models
• Suzuki SJ410           1980 - 1984       All Models

General Information

• NEW in the Original Packaging
• Stocked & Shipped From - LEXINGTON, KY

What is This Part?

• This part is the Lug Nut Stud that fits into the Drum and receives the lug nut after the wheel has been mounted.
• It is part number 09119-12006.
• To replace all studs it requires 5 studs per drum.
• These are for the REAR wheels only.
• The front wheels require a different type stud part #09119-12008, which we also sell. To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
• Note: Color May vary
• Direct Replacement

What Will I Receive?

• Qty 5 - Lug Nut Studs (Rear Wheel)

What Vehicle Will This Fit?

• Suzuki Samurai       1988 - 1995        All Models
• Suzuki SJ413           1988 - 1995       All Models

General Information

• NEW in the Original Packaging
• Stocked & Shipped From - LEXINGTON, KY

What is This Part?

• These parts fix the shifting problems with both shifters:
• The Locating Lever Bolt goes inside the upper transmission housing and guides the shifter’s movement through gear changes
• The Sheet Shifter goes inside the transfer case shifter housing and sits under the shifter.
• Both are easy to remove and reinstall with an average total time of about 45 minutes.
• Direct Replacement

What Will I Receive?

• Qty 1 Lever Locating Bolt (14mm)
• Qty 1 Sheet Shift
• Both parts are Genuine Suzuki OEM.

What Vehicle Will This Fit?

• Suzuki Samurai       1990 - 1995        All Models
• Suzuki SJ413           1990 - 1995       All Models

General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is the Complete Transmission and Transfer Case Shifter Repair Kit for 86-89 model Samurai™s that use the smaller 10mm Locating Bolt. This kit addresses all the common problems that cause the shift levers to bind or drag....

General Information

• NEW in the Original Packaging - (Unless Bulk Packed)
• OEM - Made by SUZUKI
• Stocked & Shipped From - LEXINGTON, KY

What is This Part?

• This part is the Lug Nut Stud that fits into the Drum and receives the lug nut after the wheel has been mounted.
• It is part number 09119-12006.
• To replace all studs it requires 5 studs per drum.
• These are for the REAR wheels only.
• The front wheels require a different type stud part #09119-12008, which we also sell.
• To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
• Note: Color May vary

What Will I Receive?

• Qty 10 - Lug Nut Studs (Rear Wheel)

What Vehicle Will This Fit?

• Suzuki Samurai      1988 - 1995       All Models
• Suzuki SJ413           1988 - 1995       All Models

What is This Part?

• This part is the Suzuki OEM Lug Nut Stud that fits into the Front Rotor and receives the lug nut after the wheel has been mounted.
• It is part number 09119-12008.
• To replace all studs it requires 5 studs per rotor.
• These are for the front wheels only.
• The rear wheels requires stud #09119-12006, which we also sell.
• To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
• NOTE: THESE WHEEL STUDS ARE THE NON-CLIPPED HEAD. The 1986 - 1988 have a clipped head. This changed occurred in the late 88 thru early 89 models so please verify which type you need if you are ordering for an 88' or 89' Samurai. From the 90' model Samurai on to 95’ they were all Non-Clipped.
• ALSO INCLUDED: Lug Nuts for the Front Wheel Studs!

What Will I Receive?

• Qty 10 - Front Studs
• Qty 10 - Lug Nuts

What Vehicle Will This Fit?

• Suzuki Samurai      1985 - 1995       All Models
• Suzuki SJ413           1985 - 1995       All Models

General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is a Suzuki OEM Sheet Shifter which sits directly below the transfer case shifter. If you are having trouble getting your transfer case to shift then this is probably what you need to fix it. This...

General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is the Complete Transmission and Transfer Case Shifter Repair Kit for 90′-95′ model Samurai™s that use the larger 12mm Locating Bolt. This kit addresses all the common problems that cause the shift levers to bind or...

What is This Part?

• These are the CONE WASHERS that fit onto the Locking Hub Installation Bolts.
• INCLUDES One Full Set of Cone Washers (Does One Locking Hub - RH or LH)
• Direct Replacement

What Will I Receive?

• Qty 6 - Cone Washers (Does One Locking Hub - RH or LH)

What Vehicle Will This Fit?

• Suzuki Samurai       1985 - 1995        All Models
• Suzuki SJ413           1985 - 1995       All Models
• Suzuki SJ410           1980 - 1984       All Models

What is This Part?

• These are the CONE WASHERS & BOLTS that fit onto the Locking Hubs.
• INCLUDES Two Full Sets of Cone Washers & Bolts (Does BOTH Locking Hubs)
• Direct Replacement

What Will I Receive?

• Qty 12 - Cone Washers
• Qty 12 - Bolts
• Qty 12 - Lock Washers

What Vehicle Will This Fit?

• Suzuki Samurai       1985 - 1995        All Models
• Suzuki SJ413           1985 - 1995       All Models