Menu

0

$0.00

Body Panels

46 ITEMS

Hide Filter

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Weld-On Tow Ring that Mounts to the Front Cross Member.
  • Come Primed and Ready to Prep for Paint!
  • NOTE: The Studs can be Removed Leaving Only the Tow Ring.

What Will I Receive?

  • Qty 1 - Weld-On Tow Ring

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

What is This Part?

  • This is Suzuki OEM Front Grill and other OEM Parts (See Below)
  • The Front Grill is made from High Impact Plastic and is pre-finished in a Gray Metallic.
  • Includes Backing Mesh & Emblem
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Grill
  • Qty 1 - Grill Mesh
  • Qty 1 - Suzuki "S" Emblem

What Vehicles Will This Fit?

  • Suzuki Samurai    1992 - 1995

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is a New Style Grill Retro-Fit kit made up of a OEM Front Grill and other OEM Parts (See Below)
  • Includes everything you need to change your "old style" Grill to a "new style" Grill
  • The Front Grill is made from High Impact Plastic and is pre-finished in a Gray Metallic.
  • The Front Support Brackets are pre-finished in Satin Black

What Will I Receive?

  • Qty 1 - Grill
  • Qty 1 - Grill Mesh
  • Qty 1 - Suzuki "S" Emblem
  • Qty 2 - Support Brackets
  • Qty 4 - Plastic Screw Nuts
  • Qty 6 - Grill Attachment Screws
  • Qty 4 - Support Bracket Attachment Screws

What Vehicles Will This Fit?

  • Suzuki Samurai    1985 - 1991
  • Suzuki SJ410        1980 - 1984

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Front Bumper, Both Front Bumper End Caps, Front Blinkers & Install Clips.
  • Front Bumper is pre-painted black
  • Includes Bumper End Caps plus Installation Clips & Screws.
  • Includes Front Turn Lights
  • Turn Key Install
  • Direct Replacement
  • NOTE: This bumper is formed via a stamped metal process and has surface imperfections that are typical to this process. While acceptable for normal Samurais, if you are building a show vehicle this bumper may not meet your needs.

What Will I Receive?

  • Qty 1 - Front Bumper    (OEM)
  • Qty 1 - LH Protector Cap (After-Market)
  • Qty 1 - RH Protector Cap (After-Market)
  • Qty 1 - LH Blinker Light (After-Market)
  • Qty 1 - RH Blinker Light (After-Market)
  • Qty 1 - Installation Clip Set

What Vehicles Will This Fit?

  • Suzuki Samurai 1985 - 1995
  • Suzuki SJ410     1980 - 1984

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Front Bumper and Both Front Bumper End Caps.
  • This is an OEM Front Bumper that was made by Suzuki that is pre-painted black
  • Comes with the after-market Bumper Corner Caps for both sides
  • Includes the install clips for the End Caps
  • Direct Replacement
  • NOTE: This bumper is formed via a stamped metal process and has surface imperfections that are typical to this process. While acceptable for normal Samurais, if you are building a show vehicle this bumper may not meet your needs.

What Will I Receive?

  • Qty 1 - Front Bumper    (OEM)
  • Qty 1 - LH Protector Cap (After-Market)
  • Qty 1 - RH Protector Cap (After-Market)
  • Qty 1 - Installation Clip Set

What Vehicles Will This Fit?

  • Suzuki Samurai 1985 - 1995
  • Suzuki SJ410     1980 - 1984

General Information

  • NEW in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Front Bumper, Front Bumper End Caps and Lights.
  • Front Bumper is pre-painted black
  • Comes with the install clips & screws for the Bumper End Caps
  • Suzuki OEM Parts
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Front Bumper
  • Qty 2 - Front Turn Lights (LH & RH)
  • Qty 1 - LH Protector Cap (Drivers Side)
  • Qty 1 - RH Protector Cap (Passengers Side)

 

Fitment

  • Suzuki Samurai       1985 - 1995       All Models
  • Suzuki SJ410           1980 - 1984      All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Front Bumper and Both Front Bumper End Caps.
  • This is an OEM Front Bumper that was made by Suzuki that is pre-painted black and comes with the Bumper Corner Caps for both sides and the install clips.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Front Bumper
  • Qty 1 - LH Protector Cap (Drivers Side)
  • Qty 1 - RH Protector Cap (Passengers Side)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Floor Pan for the Passenger's Side (RH).
  • Comes Pre-primed in Gray Primer

Caution: Read Below Statements

Note: This Floor Pan is made for a RHD Samurai but can be modified to fit the LHD Samurai. Affects Seat Tower Bracket & Connection Locations Only.Floor Pan size and Cut Pattern are the same for LHD & RHD

Inspect Pictures and Ask Questions before purchasing because these parts can’t be returned.

Condition Statement: Floor Pans are new sheet metal body parts and as such may have minor dings from shipping via sea freight. All sheet metal body parts must be prep’d prior to final painting. Special Notice: This part requires the use of welding to be properly installed.

Non-Returnable/ Sale is Final

 

What Will I Receive?

  • Qty 1 - Floor Pan (Passenger Side - RH)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Floor Pan for the Driver's Side (LH).
  • Comes Pre-primed in Gray Primer
  • Floor Pan size and Cut Pattern are the same for LHD & RHD

Caution: Read Below Statements

Note: This Floor Pan is made for a RHD Samurai but can be modified to fit the LHD Samurai. Affects Seat Tower Bracket & Connection Locations Only. Floor Pan size and Cut Pattern are the same for LHD & RHD

Inspect Pictures and Ask Questions before purchasing because these parts can’t be returned.

Condition Statement: Floor Pans are new sheet metal body parts and as such may have minor dings from shipping via sea freight. All sheet metal body parts must be prep’d prior to final painting. Special Notice: This part requires the use of welding to be properly installed.

Non-Returnable/ Sale is Final

What Will I Receive?

  • Qty 1 - Floor Pan (Driver Side - LH)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410            1980-1984        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These Suzuki OEM parts makeup the Complete Targa Bar.
  • These are the Drivers Side (LH) and Passenger Side (RH) Uprights or Vertical Pieces & Center Section.
  • Comes With Trim Garnish for Both Sides!
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Targa Bar LH Vertical Panel
  • Qty 1 - Targa Bar RH Vertical Panel
  • Qty 1 - Targa Bar Center Section
  • Qty 2 - Trim Garnish

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

READ THIS:    Condition Statement - "Metal Body Parts”

This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Metal Cover for the lower section of the fuel inlet pipe.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Lower Fuel Inlet Pipe Cover

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These are the Suzuki OEM Left & Right Targa Vertical Pieces.
  • These are the Drivers Side (LH) and Passenger Side (RH) Uprights
  • Comes With Trim Garnish for Both Sides
  • Requires Garnish Trim Attachment Clips
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Targa Bar LH Vertical Panel
  • Qty 1 - Targa Bar RH Vertical Panel
  • Qty 2 - Trim Garnish

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

READ THIS:    Condition Statement - "Metal Body Parts”

This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.

 

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These Suzuki OEM parts makeup the Complete Targa Bar.
  • These are the Drivers Side (LH) and Passenger Side (RH) Uprights or Vertical Pieces & Center Section.
  • Direct Replacement

READ THIS:    Condition Statement - "Metal Body Parts”

This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.

What Will I Receive?

  • Qty 1 - Targa Bar LH Vertical Panel
  • Qty 1 - Targa Bar RH Vertical Panel
  • Qty 1 - Targa Bar Center Section

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These are the Drivers Side (LH) and Passenger Side (RH) Vertical Pieces
  • Direct Replacement

READ THIS:    Condition Statement - "Metal Body Parts”

This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.

What Will I Receive?

  • Qty 1 - Targa Bar LH Vertical Panel
  • Qty 1 - Targa Bar RH Vertical Panel

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Lower Bed Tail Member piece.
  • It fits directly below the Tailgate.
  • Come Primed and Ready to Prep for Paint!
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Tail Member, Lower Bed

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

What is This Part?

  • This is a CLEARANCE Suzuki OEM parts are the Complete Targa Bar.
  • These are the Drivers Side (LH) and Passenger Side (RH) Uprights or Vertical Pieces & the Horizontal Center Section.
  • NOTE: The Pictured Parts are a Stock Photo of the parts being sold but are not the parts you will receive.
  • Direct Replacement 

What Will I Receive?

  • Qty 1 - Targa Bar LH Vertical Panel    (CLEARANCE)
  • Qty 1 - Targa Bar RH Vertical Panel    (CLEARANCE)
  • Qty 1 - Targa Bar Center Section   (CLEARANCE)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

 

READ THIS:    Condition Statement - "Metal Body Parts”

This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions BEFORE BUYING. Purchasing of this Part Constitutes Buyers Acknowledgement of Reading and Acceptance of the Above Condition Statement.

What is This Part?

  • This is a CLEARANCE Suzuki OEM parts are the Targa Bar LH & RH Vertical Panels.
  • These are the Drivers Side (LH) and Passenger Side (RH) Uprights
  • Direct Replacement 

What Will I Receive?

  • Qty 1 - Targa Bar LH Vertical Panel    (CLEARANCE)
  • Qty 1 - Targa Bar RH Vertical Panel    (CLEARANCE)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

 

READ THIS:    Condition Statement - "Metal Body Parts”

This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions BEFORE BUYING. Purchasing of this Part Constitutes Buyers Acknowledgement of Reading and Acceptance of the Above Condition Statement.

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is a Suzuki OEM Front Bumper Bar
  • Suzuki OEM Part
  • Direct Replacement
  • Condition Statement:
  • This bumper is formed via a stamped metal process and has minor surface imperfections that are typical to this process. While acceptable for normal Samurais, if you are building a show vehicle this bumper may not meet your needs. 

What Will I Receive?

  • Qty 1 - Front Bumper Bar

What Vehicles Will This Fit?

  • Suzuki Samurai    1985 - 1995
  • Suzuki SJ410        1980 - 1984

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the License Plate Mounting Bracket and the three Attachment Screws.
  • Also comes with the Bolt-on Brace for the newer models.
  • Comes Pre-Painted Black
  • Direct Replacement

What Will I Receive?

  • Qty 1 - License Plate Mounting Bracket
  • Qty 3 - Attachment Screws
  • Qty 1 - Bolt-on Brace

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Holder for the Fender Flare for the Rear Passenger’s Side.
  • Comes primed and Ready To Prep for Paint.
  • Suzuki OEM
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Holder, Fender Flare - Rear Passenger Side

What Vehicle Will This Fit?

  • Suzuki Samurai       1990 - 1995        All Models
  • Suzuki SJ413           1990 - 1995       All Models

 

READ THIS:    Condition Statement - "Metal Body Parts”

This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions BEFORE BUYING. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is a Suzuki OEM Hood Cowling.
  • This part mounts directly behind the hood.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Cowling

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

 

READ THIS:    Condition Statement - "Metal Body Parts”

This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions BEFORE BUYING. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This Suzuki OEM part that fastens onto the window frame and connects to the windshield frame to the door rail.
  • Comes in pairs (LH & RH).
  • Comes Primed in Gray
  • NOTE: These Brackets only require a "one screw” mount to the Windshield Frame (The old style required a “two screw” mount. This is done to leave room for installing a Hard-Top and the necessary mounting latches (which will use those holes) . It also works fine with a Soft Top and it allows you to easily switch back and forth from a Hard Top to a Soft Top. When you are using the Soft Top you will have one screw hole that is unused unless you have the Hard Top Mounting Latch installed.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Door Rail Mounting Bracket - RH
  • Qty 1 - Door Rail Mounting Bracket - LH

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models
  • Suzuki SJ410           1980 - 1984       All Models

What is This Part?

  • These are the Suzuki OEM -REAR- bumper connecter brackets.
  • These brackets bolt to the rear frame.
  • Once attached to the frame then the bumper is bolted to these brackets.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - RH Bracket
  • Qty 1 - LH Bracket

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Holder for the Fender Flare for the Rear Driver’s Side.
  • Comes primed and Ready To Prep for Paint.
  • Suzuki OEM
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Holder, Fender Flare - Rear Drivers Side

What Vehicle Will This Fit?

  • Suzuki Samurai       1990 - 1995        All Models
  • Suzuki SJ413           1990 - 1995       All Models

 

READ THIS:    Condition Statement - "Metal Body Parts”

This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions BEFORE BUYING. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Metal Rear Bumper Bar.
  • This is a true OEM bumper so it will attach to your existing brackets without any modification
  • Pre-Painted Black
  • Made by SUZUKI
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Rear Bumper Bar

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995   All Models
  • Suzuki SJ410           1980 - 1984   All Models

 

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Metal Fender Liners for the Front Fenders.
  • Includes the Drivers Side & Passenger Side
  • Direct Replacement

READ THIS:    Condition Statement - "Metal Body Parts”

This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.

What Will I Receive?

  • Qty 1 - Fender Liner (Drivers Side)
  • Qty 1 - Fender Liner (Passengers Side)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Metal Grill for the Suzuki SJ410
  • All Metal
  • Direct Replacement
  • Note: I also sell the Complete Grill Set and Headlight Bezels
  • Note: This Grill is a Metal Part and Can be Expected to Arrive with Minor Shipping Dings that Will Require Prep Work
  • Note: Grill is Rough Primed/Painted Black and Requires Prep Work and Final Painting Prior to Installation.

What Will I Receive?

  • Qty 1 - Grill

What Vehicle Will This Fit?

  • Suzuki SJ410       1980 - 1984    All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki Samurai Fuel Filler Inlet Kit.
  • Fits the Carbureted & Fuel Injected Models.
  • Comes With An All-Metal, Well Built & Secure Locking Gas Cap
  • Includes the Rubber Filler Hose
  • Comes with Clamps
  • Includes the Rubber Hose Gasket
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Locking Gas Cap w/Keys
  • Qty 1 - Fuel Filler Inlet
  • Qty 1 - Gasket
  • Qty 1 - Hose (Filler Inlet)
  • Qty 2 - Hose Clamps

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Rear Wheel for the RH Side (Passenger Side).
  • Comes Primed and ready to prep for paint.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Wheel Well (RH Side)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

READ THIS:    Condition Statement - "Metal Body Parts”

This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Rear Wheel for the LH Side (Driver Side).
  • Comes Primed and ready to prep for paint.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Wheel Well  (LH Side)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

 

READ THIS:    Condition Statement - "Metal Body Parts”

This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.

 

What is This Part?

  • This is the Suzuki OEM Fuel Filler Inlet for the gas tank
  • Fits fuel injected and carbureted models
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Gas Cap
  • Qty 1 - Fuel Filler Inlet

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is a Suzuki OEM Tailgate
  • Works with both the old style & new style spare tire holders
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Tailgate

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

READ THIS:    Condition Statement - "Metal Body Parts”

This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM “Lower Hood Support”.
  • Fastens across the bottom of the grill area and connects from one fender to the other.
  • The bottom of the vertical grill supports mount to this part.
  • Direct Replacement

READ THIS:    Condition Statement - "Metal Body Parts”

This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.

What Will I Receive?

  • Qty 1 - Lower Member

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

What is This Part?

  • This is the Suzuki OEM “Upper Hood Support”.
  • It fastens across the Top of the grill area and connects from one fender to the other.
  • The Top of the two vertical grill supports mount to this part and are included.
  • Direct Replacement

READ THIS:    Condition Statement - "Metal Body Parts”

This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.

What Will I Receive?

  • Qty 1 - Upper Hood Support (Upper Member)
  • Qty 2 - Vertical Hood Supports

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These Suzuki OEM parts fasten from the lower hood support to the upper hood support in the grill area.
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Vertical Hood Supports

What Vehicle Will This Fit?

  • Suzuki Samurai       1990 - 1995        All Models
  • Suzuki SJ413           1990 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These Suzuki OEM parts fasten directly above the passengers and drivers doors
  • Connects to the windshield frame on one end and the targa bar on the other end.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Door Rail - LH
  • Qty 1 - Door Rail - RH

What Vehicle Will This Fit?

  • Suzuki Samurai    1985 - 1995    All Models
  • Suzuki SJ410        1980 - 1984     All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These are Premium Grade Mud-Flaps that attach perfectly to the existing stock mud-flap frames.
  • These Premium Maruti Mud-Flaps are made from a thicker and and more durable rubber than the original Suzuki mud flaps.
  • This heavy construction means you don’t have to worry about tear-out around the mounting bolts when you go off-road or rubber fatigue affecting the deflection properties of the flap when your traveling at speed on the highway.
  • Note: Maruti is embossed on rubber
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Mud Flaps

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Front Bumper Bar Cross Member.
  • This is what the Front Bumper attaches to.
  • Comes with the LH & RH Bumper Attachment Plates
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Cross Member, Front Bumper
  • Qty 1 - RH Bumper Attachement Plate
  • Qty 1 - LH Bumper Attachement Plate

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Door Rail that Fastens Directly above the Passengers Door.
  • Connects to the windshield frame on one end and the targa bar on the other end.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Door Rail - RH

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Suzuki OEM Door Rail that Fastens Directly above the Drivers Door
  • Connects to the windshield frame on one end and the targa bar on the other end.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Door Rail - LH

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Metal Grill and Light Bezels for the *Suzuki SJ410 & *Suzuki Samurai
  • Grill is made from Steel / Bezels are made from High Impact Plastic
  • *Suzuki SJ410      1980 - 1984  -  "Direct Fit"
  • *Suzuki Samurai  1986 - 1995  -  "Not a Direct Fit" - Can be Retro-Fitted to these Model but is Not a Direct Fit and Requires Fitment Work.
  • Note: This Grill is a Metal Part and Can be Expected to Arrive with Minor Shipping Dings that Will Require Prep Work
  • Note: Grill is Rough Primed/Painted Black and Requires Prep Work and Final Painting Prior to Installation.

What Will I Receive?

  • Qty 1 - Grill
  • Qty 1 - Headlight Bezel (Driver Side)
  • Qty 1 - Headlight Bezel (Passenger Side)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995      All Models     "Not a Direct Fit"
  • Suzuki SJ410           1980 - 1984      All Models     "Direct Fit"

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This Suzuki OEM part is 1 of the 3 panels that make up the Targa bar.
  • This is the center section that goes directly over your head when sitting in the car.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Targa Bar Center Section

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

 

READ THIS:    Condition Statement - "Metal Body Parts”

This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.

 

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These are the Suzuki OEM -FRONT- bumper connecter brackets.
  • These brackets bolt to the front frame.
  • Once attached to the frame then the bumper is bolted to these brackets.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - LH Front Bumper Bracket
  • Qty 1 - RH Front Bumper Bracket

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

What is This Part?

  • This is the Suzuki Samurai Fuel Filler Inlet Kit.
  • Fits the Carborated & Fuel Injected Models.
  • Comes With An All-Metal, Well Built & Secure Locking Gas Cap.
  • Includes the Rubber Hose Gasket!
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Locking Gas Cap w/Keys
  • Qty 1 - Fuel Filler Inlet
  • Qty 1 - Gasket

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • These are Original OEM Suzuki Grill Mount Supports for 1992 - 1995 Samurai Models
  • Made by Suzuki
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Supports

What Vehicle Will This Fit?

  • Suzuki Samurai   1992 - 1995    All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Atlanta, GA

What is This Part?

  • This is the Mud Flaps for the Rear Wheels
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Mud Flaps

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models