Select Free Shipping in Cart!
General Information
- New in the Original Packaging - (Unless Bulk Packed)
- Stocked & Shipped From - Lexington, KY
- Quality After-Market Part
What is This Part?
- These are the Two Center Hub Caps for the Wheels
- Fit 3.375 / 84mm Openings
They have a 1mm Lip around the bottom making the overall Diameter 86mm.
- 22mm Tall
- Made from Molded Plastic Resin
- Color: Gray
What Will I Receive?
What Vehicle Will This Fit?
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This part is the nut that secures the wheel to the spindle.
- 5 per wheel required
- Direct Replacement
What Will I Receive?
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ410 1980 - 1984 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Suzuki OEM Jack Handle Clip & Grommet
- Suzuki OEM Parts
- Direct Replacement
What Will I Receive?
- Qty 2 - Clip
- Qty 1 - Grommet (Large)
- Qty 1 - Grommet (Small)
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ413 1985 - 1995 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This part is the Lug Nut Stud that fits into the Drum and receives the lug nut after the wheel has been mounted.
- Does One Rear Wheel
- These are "Clipped" Studs for the REAR wheels on the 1980 - 1987 Models
- FINISH: Zinc
- OEM - Made by SUZUKI
What Will I Receive?
- Qty 5 - Lug Nut Studs (Rear Wheels)
What Vehicle Will This Fit?
- Suzuki Samurai 1988 - 1987 All Models
- Suzuki SJ410 1980 - 1984 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This part is the Lug Nut Stud that fits into the Drum and receives the lug nut after the wheel has been mounted.
- Does Both Rear Wheels
- These are "Clipped" Studs for the REAR wheels on the 1980 - 1987 Models
- FINISH: Zinc
- OEM - Made by SUZUKI
What Will I Receive?
- Qty 10 - Lug Nut Studs (Rear Wheels)
What Vehicle Will This Fit?
- Suzuki Samurai 1988 - 1987 All Models
- Suzuki SJ410 1980 - 1984 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging - (Unless Bulk Packed)
- OEM - Made by SUZUKI
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This part is the Lug Nut Stud that fits into the Drum and receives the lug nut after the wheel has been mounted.
- It is part number 09119-12006.
- To replace all studs it requires 5 studs per drum.
- These are for the REAR wheels only.
- The front wheels require a different type stud part #09119-12008, which we also sell.
- To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
- Note: Color May vary
What Will I Receive?
- Qty 10 - Lug Nut Studs (Rear Wheel)
What Vehicle Will This Fit?
- Suzuki Samurai 1988 - 1995 All Models
- Suzuki SJ413 1988 - 1995 All Models
Select Free Shipping in Cart!
What is This Part?
- This part is the Suzuki OEM Lug Nut Stud that fits into the Front Rotor and receives the lug nut after the wheel has been mounted.
- It is part number 09119-12008.
- To replace all studs it requires 5 studs per rotor.
- These are for the front wheels only.
- The rear wheels requires stud #09119-12006, which we also sell. To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
- NOTE: Color May vary
- NOTE: THESE WHEEL STUDS ARE THE NON-CLIPPED HEAD. The 1986 - 1988 have a clipped head. This changed occurred in the late 88' thru early 89' models so please verify which type you need if you are ordering for an 88' or 89' Samurai. From the 90' model Samurai on to 95’ they were all Non-Clipped.
- Direct Replacement
What Will I Receive?
- Qty 5 - Lug Nut Studs (Front Wheel)
What Vehicle Will This Fit?
- Suzuki Samurai 1988 - 1995 All Models
- Suzuki SJ413 1988 - 1995 All Models
Select Free Shipping in Cart!
General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is the...
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This part mounts to the rear gate and its sole function is to hold the spare tire.
- This is the later model that also holds the 3rd brake light.
- Painted Black
- Direct Replacement
What Will I Receive?
- Qty 1 - Spare Tire Carrier
- Qty 3 - Spare Tire Cushions
- Qty 3 - Screws for Cushions
What Vehicle Will This Fit?
- Suzuki Samurai 1994 - 1995 All Models
- Suzuki SJ413 1994 - 1995 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Suzuki OEM Jack & Jack Handle.
- INCLUDES the Jack Handle Clip & Grommet.
- Because its OEM - Jack Fits perfectly into the original location under the Hood.
- Because its OEM - Handle Fits perfectly into the original location under the Seat.
- Direct Replacement
What Will I Receive?
- Qty 1 - Jack
- Qty 1 - Handles
- Qty 1 - Clip
- Qty 1 - Grommets
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ413 1985 - 1995 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- Spare Tire Bumpers / Cushions
- Direct Replacement
What Will I Receive?
What Vehicle Will This Fit?
- Mechanical: 1985 - 1995(*Verify the information listed under “Mechanical")
- Cosmetic: 1985 - 1995 Models:
- Mechanical: All Models(*Unless noted otherwise)
- Cosmetic: 2 Door Soft Top Models(*Unless noted otherwise) Mechanical:
- Engine: 4 Cylinder / 1.3 Liter / 8 Valve
- Drivetrain: Manual Transmission / 4 Wheel Drive
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This part is the Lug Nut Stud that fits into the Drum and receives the lug nut after the wheel has been mounted.
- It is part number 09119-12006.
- To replace all studs it requires 5 studs per drum.
- These are for the REAR wheels only.
- The front wheels require a different type stud part #09119-12008, which we also sell. To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
- Note: Color May vary
- Direct Replacement
What Will I Receive?
- Qty 5 - Lug Nut Studs (Rear Wheel)
What Vehicle Will This Fit?
- Suzuki Samurai 1988 - 1995 All Models
- Suzuki SJ413 1988 - 1995 All Models
Select Free Shipping in Cart!
General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This part...
Select Free Shipping in Cart!
General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is the...
Select Free Shipping in Cart!
What is This Part?
- This part is the Suzuki OEM Lug Nut Stud that fits into the Front Rotor and receives the lug nut after the wheel has been mounted.
- It is part number 09119-12008.
- To replace all studs it requires 5 studs per rotor.
- These are for the front wheels only.
- The rear wheels requires stud #09119-12006, which we also sell. To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
- NOTE: THESE WHEEL STUDS ARE THE NON-CLIPPED HEAD. The 1986 - 1988 have a clipped head. This changed occurred in the late 88' thru early 89' models so please verify which type you need if you are ordering for an 88' or 89' Samurai. From the 90' model Samurai on to 95’ they were all Non-Clipped.
- Direct Replacement
What Will I Receive?
- Qty 10 - Lug Nut Studs (Front Wheel)
What Vehicle Will This Fit?
- Suzuki Samurai 1988 - 1995 All Models
- Suzuki SJ413 1988 - 1995 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This part is the Nut nut that secures the wheel to the spindle.
- 5 per wheel required.
- Direct Replacement
What Will I Receive?
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ410 1980 - 1984 All Models
Select Free Shipping in Cart!
What is This Part?
- This part is the Suzuki OEM Lug Nut Stud that fits into the Front Rotor and receives the lug nut after the wheel has been mounted.
- It is part number 09119-12008.
- To replace all studs it requires 5 studs per rotor.
- These are for the front wheels only.
- The rear wheels requires stud #09119-12006, which we also sell.
- To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
- NOTE: THESE WHEEL STUDS ARE THE NON-CLIPPED HEAD. The 1986 - 1988 have a clipped head. This changed occurred in the late 88 thru early 89 models so please verify which type you need if you are ordering for an 88' or 89' Samurai. From the 90' model Samurai on to 95’ they were all Non-Clipped.
- ALSO INCLUDED: Lug Nuts for the Front Wheel Studs!
What Will I Receive?
- Qty 10 - Front Studs
- Qty 10 - Lug Nuts
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ413 1985 - 1995 All Models