Cart

What is This Part?

• This part is the Suzuki OEM Lug Nut Stud that fits into the Front Rotor and receives the lug nut after the wheel has been mounted.
• It is part number 09119-12008.
• To replace all studs it requires 5 studs per rotor.
• These are for the front wheels only.
• The rear wheels requires stud #09119-12006, which we also sell. To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
• NOTE: THESE WHEEL STUDS ARE THE NON-CLIPPED HEAD. The 1986 - 1988 have a clipped head. This changed occurred in the late 88' thru early 89' models so please verify which type you need if you are ordering for an 88' or 89' Samurai. From the 90' model Samurai on to 95’ they were all Non-Clipped.
• Direct Replacement

What Will I Receive?

• Qty 10 - Lug Nut Studs (Front Wheel)

What Vehicle Will This Fit?

• Suzuki Samurai   1988 - 1995    All Models
• Suzuki SJ413       1988 - 1995   All Models

General Information

• NEW in the Original Packaging
• Stocked & Shipped From - LEXINGTON, KY

What is This Part?

• This is the Suzuki OEM Transmission Gear Shifting Pin Select Guide Set that goes into the shifter housing.
• Direct Replacement

What Will I Receive?

• Qty 1 - Pin, Low Speed Select Guide
• Qty 1 - Pin, Reverse Select Guide
• Qty 2 - Spring, Select Return
• Qty 2 - Plug

What Vehicle Will This Fit?

• Suzuki Samurai       1985 - 1995        All Models
• Suzuki SJ413           1985 - 1995       All Models

General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is the Suzuki OEM Transfer Case Shifter Knob Direct Replacement What Will I Receive? Qty 1 – Knob, T-Case Shifter What Vehicle Will This Fit? Suzuki Samurai       1985 – 1995        All Models Suzuki SJ413          ...

General Information

• NEW in the Original Packaging
• Stocked & Shipped From - LEXINGTON, KY

What is This Part?

• This is the Transmission Shift Lever Repair Kit that repairs all the shifting components  of the Transmission Shift Lever.
• This Repair kit fits Samurai from 1985 -1989
• Direct Replacement

What Will I Receive?

• Qty 1 - Cover, Lever Case
• Qty 3 - Bolts, Cover
• Qty 1 - Washer, Shift Lever
• Qty 1 - Bush, Shift Lever
• Qty 1 - Boot #2, Shift Lever
• Qty 1 - Locating Bolt, 10mm

What Vehicle Will This Fit?

• Suzuki Samurai       1985 - 1989        All Models
• Suzuki SJ413           1985 - 1989       All Models

General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is the Complete Transfer Case Shifter Repair Kit which is the only kit that repairs all aspects of the Transfer Case shifting mechanism. Repairs both the Transfer Case Shift Lever and Shifting Rods. Direct Replacement What...

General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is the Complete Transmission and Transfer Case Shifter Repair Kit for 86-89 model Samurai™s that use the smaller 10mm Locating Bolt. This kit addresses all the common problems that cause the shift levers to bind or drag....

General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is the Sheet Shifter which sits directly below the transfer case shifter. If you are having trouble getting your transfer case to shift then this is probably what you need to fix it. Direct Replacement What...

General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is the Complete Transmission and Transfer Case Shifter Repair Kit for 90′-95′ model Samurai™s that use the larger 12mm Locating Bolt. This kit addresses all the common problems that cause the shift levers to bind or...

General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is the Upper Boot for the Transmission Shifter INCLUDES COVER & SCREWS! Direct Replacement What Will I Receive? Qty 1 – Upper Boot Qty 1 – Cover Qty 4 – Attachment Screws What Vehicle Will This...

General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is the Suzuki Upper Boot for the Transfer Case Shifter INCLUDES COVER & SCREWS! Direct Replacement What Will I Receive? Qty 1 – Upper Boot Qty 1 – Cover Qty 4 – Attachment Screws What Vehicle...

What is This Part?

• This part is the Suzuki OEM Lug Nut Stud that fits into the Front Rotor and receives the lug nut after the wheel has been mounted.
• It is part number 09119-12008.
• To replace all studs it requires 5 studs per rotor.
• These are for the front wheels only.
• The rear wheels requires stud #09119-12006, which we also sell.
• To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
• NOTE: THESE WHEEL STUDS ARE THE NON-CLIPPED HEAD. The 1986 - 1988 have a clipped head. This changed occurred in the late 88 thru early 89 models so please verify which type you need if you are ordering for an 88' or 89' Samurai. From the 90' model Samurai on to 95’ they were all Non-Clipped.
• ALSO INCLUDED: Lug Nuts for the Front Wheel Studs!

What Will I Receive?

• Qty 10 - Front Studs
• Qty 10 - Lug Nuts

What Vehicle Will This Fit?

• Suzuki Samurai      1985 - 1995       All Models
• Suzuki SJ413           1985 - 1995       All Models

What is This Part?

• These are the CONE WASHERS & BOLTS that fit onto the Locking Hubs.
• INCLUDES Two Full Sets of Cone Washers & Bolts (Does BOTH Locking Hubs)
• Direct Replacement

What Will I Receive?

• Qty 12 - Cone Washers
• Qty 12 - Bolts
• Qty 12 - Lock Washers

What Vehicle Will This Fit?

• Suzuki Samurai       1985 - 1995        All Models
• Suzuki SJ413           1985 - 1995       All Models