General Information

• New in the Original Packaging - (Unless Bulk Packed)
• Genuine Suzuki OEM Part
• Stocked & Shipped From - LEXINGTON, KY

What is this Part?

• This is the Suzuki OEM LH&RH Rear Brake Cylinders for the 88.5’ thru 95’ Suzuki Samurai.
• Note: Will not fit 86’ thru 88’ models.
• These are the Hydraulic Cylinders that activate the lever assembly to engage the rear brake shoes.
• Direct Replacement

What Will I Receive?

• Qty 1 - Rear Brake Cylinder RH
• Qty 1 - Rear Brake Cylinder LH

What Vehicle Will This Fit?

• Suzuki Samurai      1988.5 - 1995       All Models
• SJ413                     1988.5 - 1995       All Models

General Information Stocked & Shipped From – LEXINGTON, KY NEW in the Original Packaging What Is This Part?  This is the Suzuki OEM Lever Assembly for the Passenger Side Rear Drum Brake. Suzuki OEM Part Direct Replacement What Will I Receive? Qty 1 – Lever Assembly  (Passenger Side) What Vehicle Will This Fit? Suzuki Samurai      1985...

What is This Part?

• This is the Suzuki OEM Rear Main Bearing Seal Set for the Suzuki 1.3L/8V G13BA Engine.
• This is the Oil Seal for the rear of the Crank Shaft.
• Made by SUZUKI
• Direct Replacement

What Will I Receive?

• Qty 1 - Oil Seal 09283-68001
• Qty 1 - Gasket  11349M60A20

What Vehicle Will This Fit?

• Suzuki Samurai      1985 - 1995   All Models

General Information

• NEW in the Original Packaging
• Stocked & Shipped From - LEXINGTON, KY

What is This Part?

• This is the Suzuki OEM Rear Axle Housing PLUS the Rear Axle Bearing and Oil Seal Repair Kit.
• It does BOTH SIDES.
• You get everything you need to complete the repair on both axles.
• Contains Genuine Suzuki OEM Parts & Quality After-market Parts
• Direct Replacement

What Will I Receive?

• Qty 1 - Rear Axle Housing
• Qty 2 - Bearings (LH & RH)
• Qty 2 - Oil Seals (LH & RH)
• Qty 2 - Retainer Ring, Oil Seals (LH & RH)
• Qty 2 - Protectors, Oil Seals (LH & RH)
• Qty 8 - Stud Bolts
• Qty 1 - Breather Cap Assembly
• Qty 1 - Filler Plug
• Qty 1 - Drain Plug & Gasket

What Vehicle Will This Fit?

• Suzuki Samurai          1985 - 1995     All Models

General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is the Suzuki OEM Rear Floor Panel for the Front LH wheel housing This is a fit for the Gypsy King or Samurai LWB Goes in front of wheel housing panel Direct Replacement What Will I...

General Information

• NEW in the Original Packaging
• Stocked & Shipped From - LEXINGTON, KY

What is This Part?

• This is the Current Suzuki OEM Seat Belt for the Suzuki Samurai.
• It does away with the unreliable retractor mechanism and replaces it with manually adjusted Seat Belts.
• This conversion kit comes with the Drivers Side and Passengers Side Seat Belts and Plates to cover the holes left by the removal of the old seat belt retractor mechanism.
• Just remove your existing Seat Belts and place the New plate back on the retractor housing. Then just bolt the new Seat Belts into the existing holes.
• Yes, it uses the existing holes because this Seat Belt is made for the Suzuki SJ413.
• Direct Replacement

What Will I Receive?

• Qty 1 - Seatbelt Portion with Female Latch (Driver Side)

• Qty 1 - Seatbelt Portion with Male Latch (Driver Side)

• Qty 1 - Seatbelt Portion with Female Latch (Passenger Side)

• Qty 1 - Seatbelt Portion with Male Latch (Passenger Side)

• Qty 2 - Plate, Retractor MechanismQty 8 - Screws, Plate, Retractor Mechanism

What Vehicle Will This Fit?

• Suzuki Samurai       1985 - 1995        All Models
• Suzuki SJ413           1985 - 1995       All Models

General Information Stocked & Shipped From – LEXINGTON, KY New in the Original Packaging What is this Part? This is the Suzuki OEM Level 3 Rear Brake Drum Repair Kit Does BOTH Sides Suzuki OEM Parts Direct Replacement We sell three different size repair kits to suit your needs: Level 1)   Basic        ...

What is This Part? This is the Suzuki OEM Rear Engine/Transmission Mount Made by SUZUKI Direct Replacement What Will I Receive? Qty 1 – Transmission Mount What Vehicle Will This Fit? Suzuki Samurai      1985 – 1995   All Models Suzuki SJ413          1985 – 1995   All Models

What is This Part?

• This is the Suzuki OEM Transmission Main Shaft Bushes for the Samurai 5 Speed Transmission.
• Direct Replacement

What Will I Receive?

• Qty 2 - Bushes, Main Shaft

What Vehicle Will This Fit?

• Suzuki Samurai       1985 - 1995        All Models
• Suzuki SJ413           1985 - 1995       All Models

General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is the Suzuki OEM Ash Tray that fits into the front dash. It comes with the upper metal installation housing. Will only fit Circle vent dash, will not fit the square vent dash Direct Replacement What Will I...

General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is the OEM Suzuki Samurai JA Model, Driver’s and Passenger’s Front Seats plus Headrests. TILT MECHANISMS NOT INCLUDED. These are NOT COVERS but rather the COVERS/FRAMES & CUSHIONS plus HEADRESTS for the Driver Side & Passenger Side. All you will...

What is This Part? This is the Suzuki OEM rubber cover that goes over the metal foot plate on the Accelerator pedal Suzuki OEM Part Direct Replacement What Will I Receive? Qty 1 – Cover, Accelerator What Vehicle Will This Fit? Suzuki Samurai       1985 – 1995        All Models Suzuki SJ410           1980...

General Information

• NEW in the Original Packaging
• Stocked & Shipped From - LEXINGTON, KY

What is This Part?

• This is the Suzuki Floor Pan for the Passenger's Side (RH).
• Comes Pre-primed in Gray/Brown Primer
• These are made by the OEM manufacturer, however are not considered OEM
• These are a good, inexpensive way to put new floor pans into Samurai. They are not perfect, and may have hand press bends and pinches.
• Best result is to cover these with a floor covering after final prep/paint.

Caution: Read Below Statements

Note: These Floor Pans are made for a RHD Samurai but can be modified to fit the LHD Samurai. Affects Seat Tower Bracket & Connection Locations Only. Floor Pan size and Cut Pattern are the same for LHD & RHD

Inspect Pictures and Ask Questions before purchasing because these parts can't be returned.

Condition Statement: Floor Pans are new sheet metal body parts and as such may have minor dings from shipping via sea freight. All sheet metal body parts must be prepared prior to final painting. Items may also contain surface rust.

Special Notice: This part requires the use of welding to be properly installed.

Non-Returnable/ Sale is Final

What Will I Receive?

• Qty 1 - Floor Pan (Passenger Side - RH)

What Vehicle Will This Fit?

• Suzuki Samurai       1985 - 1995        All Models
• Suzuki SJ410           1980 - 1984       All Models

What is This Part?

• These are the rubber covers that go over the metal foot plates on the Accelerator, clutch and brake pedals
• Direct Replacement

What Will I Receive?

• Qty 1 - Cover, Clutch
• Qty 1 - Cover, Brake
• Qty 1 - Cover, Accelerator

What Vehicle Will This Fit?

• Suzuki Samurai       1985 - 1995        All Models
• Suzuki SJ410           1980 - 1984       All Models