Menu

0

$0.00

Transmission Parts / Gears

34 ITEMS

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the Transmission Shift Lever Upper Case Rebuild Kit for 1990 - 1995 Samurai's.
  • Includes the 12mm Locating Bolts & Sheet
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Transmission Shift Lever Upper Case Rebuild Kit

Per the Diagram You Will Get the Following Part Numbers:

  • Qty - 1 Pin, Low Speed Select Guide
  • Qty - 1 Pin, Reverse Select Guide
  • Qty - 2 Spring, Select Return
  • Qty - 1 Ball
  • Qty - 1 Spring, Inner
  • Qty - 1 Spring, Outer
  • Qty - 1 Screw, Reverse Guide Pin
  • Qty - 2 Plug
  • Qty - 1 Bolt, Lever Locating 12mm
  • Qty - 1 Washer
  • Qty - 1 Shifter Sheet

What Vehicle Will This Fit?

  • Suzuki Samurai       1990 - 1995        All Models
  • Suzuki SJ413           1990 - 1995       All Models

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the Suzuki Samurai Transmission Needle & Roller Bearing Rebuild Kit Level 1
  • Also Includes the Input Shaft Oil Seal
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Roller Bearing  #3
  • Qty 1 - Roller  Bearing  #20
  • Qty 1 - Roller Bearing  #22
  • Qty 1 - Roller Bearing  #27
  • Qty 1 - Roller Bearing  #29
  • Qty 1 - Roller Bearing  #30
  • Qty 1 - Needle Bearing  #2
  • Qty 1 - Needle Bearing  #19
  • Qty 1 - Oil Seal - Input Shaft #6

Bonus Parts

  • Qty 2 - Circlips #24/28
  • Qty 1 - C Ring #21
  • Qty 1 - C Ring #4
  • Qty 1 - Synchro Spring
  • Qty 1 - Synchro Spring
  • Qty 3 - Synchro Ring High
  • Qty 2 - Synchro Ring Low
  • Qty 1 - Pin #43
  • Qty 1 - Reverse Back Up Switch
  • Qty 1 - Clutch Release Bush
  • Qty 1 - Clutch Release Shaft Spring

What Vehicle Will This Fit?

  • Suzuki Samurai      1986 - 1995       All Models

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the Suzuki Samurai Transmission Needle & Roller Bearing Rebuild Kit Level 1
  • Also Includes the Input Shaft Oil Seal
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Roller Bearing  #3
  • Qty 1 - Roller  Bearing  #20
  • Qty 1 - Roller Bearing  #22
  • Qty 1 - Roller Bearing  #27
  • Qty 1 - Roller Bearing  #29
  • Qty 1 - Roller Bearing  #30
  • Qty 1 - Needle Bearing  #2
  • Qty 1 - Needle Bearing  #19
  • Qty 1 - Oil Seal - Input Shaft #6

Bonus Parts

  • Qty 2 - Circlips #24/28
  • Qty 1 - Pin #43
  • Qty 1 - Reverse Back Up Switch
  • Qty 1 - Clutch Release Bush
  • Qty 1 - Clutch Release Shaft Spring

 

What Vehicle Will This Fit?

  • Suzuki Samurai      1986 - 1995       All Models

 

Select Free Shipping in Cart!

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the Transmission Oil Seal Kit
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Oil Seal, Output Shaft/Extension Case
  • Qty 1 - Oil Seal, Input Shaft

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995   All Models
  • Suzuki SJ410          1980 - 1984   All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the Transmission Main Shaft Low/High Synchronized Rings for the 5 Speed Transmission.
  • Parts #33 & #38 on the Transmission Diagram
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Low Speed Synchronizer Rings   #33
  • Qty 3 - High Speed Synchronizer Rings  #38

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the Transmission Extension Case Oil Seal
  • Part # 18 in Diagram (pictured)
  • This is the Oil Seal that fits into the Extension Case where the Rear Drive Shaft connects.
  • If you are having a leak at the end of the transmission then you are needing this oil seal.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Oil Seal

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the Suzuki Samurai Transmission Roller Bearing Set.
  • Includes All Roller Bearings & Input Shaft Oil Seal / Extension Case Oil Seal
  • Japanese Standard Bearings Made by FAG / NMK / Suzuki Japan / SKF
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Bearing  #3    (see diagram)
  • Qty 1 - Bearing  #20  (see diagram)
  • Qty 1 - Bearing  #22  (see diagram)
  • Qty 1 - Bearing  #27  (see diagram)
  • Qty 1 - Bearing  #29  (see diagram)
  • Qty 1 - Bearing  #30  (see diagram)
  • Qty 1 - Oil Seal, Extension Case
  • Qty 1 - Oil Seal, Input Shaft

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1988       All Models

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the Suzuki Samurai Complete Transmission Needle & Roller Bearing Rebuild Kit.
  • Includes All Needle & Roller Bearings.
  • Also Includes the Input Shaft Oil Seal & Extension Case Oil Seal
  • (Japanese Standards Bearings) Made by FAG / NMK / Suzuki Japan / SKF
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Roller Bearing  #3
  • Qty 1 - Roller  Bearing  #20
  • Qty 1 - Roller Bearing  #22
  • Qty 1 - Roller Bearing  #27
  • Qty 1 - Roller Bearing  #29
  • Qty 1 - Roller Bearing  #30
  • Qty 1 - Needle Bearing  #2
  • Qty 1 - Needle Bearing  #12
  • Qty 1 - Needle Bearing  #14
  • Qty 1 - Needle Bearing  #16
  • Qty 1 - Needle Bearing  #19
  • Qty 1 - Needle Bearing  #49
  • Qty 1 - Oil Seal - Input Shaft #6
  • Qty 1 - Oil Seal - Extension Case   (Not Shown on Diagram)

What Vehicle Will This Fit?

  • Suzuki Samurai      1986 - 1995       All Models

 

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the Suzuki Samurai Complete Transmission Bearing & Synchronizer Rebuild Kit.
  • Gives you everything you need to complete a rebuild without paying for unnecessary parts.
  • Includes a new Breather Plug & Back-Up Switch
  • Also Includes a new Clutch Release Shaft Spring & Bush
  • You also Get Additional Springs, Keys & Clips
  • Complete Needle & Roller Bears - with Input Oil Seal & Extension Case
  • (Japanese Standards Bearings) Made by FAG / NMK / Suzuki Japan / SKF
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Roller Bearing  #3
  • Qty 1 - Roller  Bearing  #20
  • Qty 1 - Roller Bearing  #22
  • Qty 1 - Roller Bearing  #27
  • Qty 1 - Roller Bearing  #29
  • Qty 1 - Roller Bearing  #30
  • Qty 1 - Needle Bearing  #2
  • Qty 1 - Needle Bearing  #12
  • Qty 1 - Needle Bearing  #14
  • Qty 1 - Needle Bearing  #16
  • Qty 1 - Needle Bearing  #19
  • Qty 1 - Needle Bearing  #49
  • Qty 1 - Oil Seal - Input Shaft #6
  • Qty 1 - Oil Seal - Extension Case (On Case Diagram - Not Shown)
  • Qty 3 - Synchronizer Ring (high) #36
  • Qty 2 - Synchronizer Ring (low) #32
  • Qty 1 - Bush  #11
  • Qty 1 - Bush  #48
  • Qty 1 - C Clip #4
  • Qty 1 - Cir-clip #5
  • Qty 1 - C Clip #21
  • Qty 1 -Cir-clip #23
  • Qty 2 - Cir-clip #24
  • Qty 1 - Cir-clip #28
  • Qty 1 - Spring, Low #34 *CURRENTLY OUT OF STOCK
  • Qty 1 - Spring, High #37
  • Qty 2 - Key #40
  • Qty 1 - Pin #43
  • Qty 1 - Breather Plug (On Case Diagram - Not Shown)
  • Qty 4 - Case Pins (On Case Diagram - Not Shown)
  • Qty 1 - Back-Up Switch (On Case Diagram - Not Shown)
  • Qty 1 - Spring,Clutch Release Shaft (On Case Diagram - Not Shown)
  • Qty 1 - Bush,Clutch Release Shaft (On Case Diagram - Not Shown)

What Vehicle Will This Fit?

  • Suzuki Samurai      1988.5 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the Suzuki OEM Transmission Main Shaft Low/High Synchronized Rings for the 5 Speed Transmission.
  • Parts #33 & #38 on the Transmission Diagram
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Low Speed Synchronizer Rings   #33
  • Qty 3 - High Speed Synchronizer Rings  #38

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the Suzuki OEM Transmission Bolt Set to connect the Transmission Bell Housing to the Engine.
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Guide Pin

  • Qty 2 - Nuts

  • Qty 1 - Stud Bolt #1

  • Qty 1 - Stud Bolt #2

  • Qty 1 - Bolt #1

  • Qty 1 - Bolt #2

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

What is This Part?

  • This is the Suzuki OEM Transmission Main Shaft Bushes for the Samurai 5 Speed Transmission.
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Bushes, Main Shaft

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the Suzuki OEM Transmission Low Speed Synchronizer Rings for the Samurai 5 Speed Transmission.
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Low Speed Synchronizer Rings

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the Suzuki OEM Transmission Low Speed Synchronizer Springs for the Samurai 5 Speed Transmission.
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Low Speed Synchronizer Rings
  • Qty 2 - Low Springs

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models

General Information

  • New in the Original Packaging - (Unless Bulk Packed)
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the Suzuki Samurai Transmission Roller Bearing Set.
  • Includes All Roller Bearings & Input Shaft Oil Seal / Extension Case Oil Seal
  • Japanese Standard Bearings Made by FAG / NMK / Suzuki Japan / SKF
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Bearing  #3    (see diagram)
  • Qty 1 - Bearing  #20  (see diagram)
  • Qty 1 - Bearing  #22  (see diagram)
  • Qty 1 - Bearing  #27  (see diagram)
  • Qty 1 - Bearing  #29  (see diagram)
  • Qty 1 - Bearing  #30  (see diagram)
  • Qty 1 - Oil Seal, Extension Case
  • Qty 1 - Oil Seal, Input Shaft

What Vehicle Will This Fit?

  • Suzuki Samurai      1986 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the Suzuki OEM Transmission Case Guide Pin.
  • There are a total of 2 pins located These are used in different locations around the Transmission case.
  • They are used to guide the housing parts into the correct location during assembly
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Guide Pins

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models