Cart

General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is a Genuine Suzuki OEM Boot For: 5 Speed Transmission Shifter / Control LeverBlack Rubber Direct Replacement What Will I Receive? Qty 1- Lower Transmission Gear Shift Boot What Vehicle Will This Fit? Suzuki Samurai      ...

What is This Part?

• This part is the Suzuki OEM Lug Nut Stud that fits into the Front Rotor and receives the lug nut after the wheel has been mounted.
• It is part number 09119-12008.
• To replace all studs it requires 5 studs per rotor.
• These are for the front wheels only.
• The rear wheels requires stud #09119-12006, which we also sell.
• To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
• NOTE: THESE WHEEL STUDS ARE THE NON-CLIPPED HEAD. The 1986 - 1988 have a clipped head. This changed occurred in the late 88 thru early 89 models so please verify which type you need if you are ordering for an 88' or 89' Samurai. From the 90' model Samurai on to 95’ they were all Non-Clipped.
• ALSO INCLUDED: Lug Nuts for the Front Wheel Studs!

What Will I Receive?

• Qty 10 - Front Studs
• Qty 10 - Lug Nuts

What Vehicle Will This Fit?

• Suzuki Samurai      1985 - 1995       All Models
• Suzuki SJ413           1985 - 1995       All Models

What is This Part?

• These are the CONE WASHERS & BOLTS that fit onto the Locking Hubs.
• INCLUDES Two Full Sets of Cone Washers & Bolts (Does BOTH Locking Hubs)
• Direct Replacement

What Will I Receive?

• Qty 12 - Cone Washers
• Qty 12 - Bolts
• Qty 12 - Lock Washers

What Vehicle Will This Fit?

• Suzuki Samurai       1985 - 1995        All Models
• Suzuki SJ413           1985 - 1995       All Models

General Information

• NEW in the Original Packaging
• Stocked & Shipped From - LEXINGTON, KY

What is This Part?

• These parts fix the shifting problems with the Transmission Shifter.
• NOTE: The Locating Lever Bolt goes inside the upper transmission housing and guides the shifter’s movement through gear changes. When this bolt gets worn or broken, shifting the gears will become difficult and replacing the bolt will be necessary.
• Includes Lock Washer
• Direct Replacement

What Will I Receive?

• Qty 1 - Lever Locating Bolt (10mm) (small)
• Qty 1 - Lock Washer

What Vehicle Will This Fit?

• Suzuki Samurai       1985 - 1989        All Models
• Suzuki SJ413           1985 - 1989       All Models

What is This Part?

• This part is the Suzuki OEM Lug Nut Stud that fits into the Front Rotor and receives the lug nut after the wheel has been mounted.
• It is part number 09119-12008.
• To replace all studs it requires 5 studs per rotor.
• These are for the front wheels only.
• The rear wheels requires stud #09119-12006, which we also sell. To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
• NOTE: THESE WHEEL STUDS ARE THE NON-CLIPPED HEAD. The 1986 - 1988 have a clipped head. This changed occurred in the late 88' thru early 89' models so please verify which type you need if you are ordering for an 88' or 89' Samurai. From the 90' model Samurai on to 95’ they were all Non-Clipped.
• Direct Replacement

What Will I Receive?

• Qty 10 - Lug Nut Studs (Front Wheel)

What Vehicle Will This Fit?

• Suzuki Samurai   1988 - 1995    All Models
• Suzuki SJ413       1988 - 1995   All Models