Cart

General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is the Complete Transfer Case Shifter Repair Kit which is the only kit that repairs all aspects of the Transfer Case shifting mechanism. Repairs both the Transfer Case Shift Lever and Shifting Rods. Direct Replacement What...

General Information

• NEW in the Original Packaging
• Stocked & Shipped From - LEXINGTON, KY

What is This Part?

• These are the CONE WASHERS & BOLTS that fit onto the Locking Hubs.
• INCLUDES One Full Set of Cone Washers & Bolts (Does One Locking Hub - RH or LH)
• Direct Replacement

What Will I Receive?

• Qty 6 - Cone Washers
• Qty 6 - Bolts
• Qty 6 - Lock Washers

What Vehicle Will This Fit?

• Suzuki Samurai       1985 - 1995        All Models
• Suzuki SJ413           1985 - 1995       All Models
• Suzuki SJ410           1980 - 1984       All Models

General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is the Suzuki OEM Front Spindle This will do one side. NOTE: Already has Brass Bushing pressed into place. Direct Replacement What Will I Receive? Qty 1 – Front Spindle with Brass Bushing pressed into place....

General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is a Suzuki OEM Sheet Shifter which sits directly below the transfer case shifter. If you are having trouble getting your transfer case to shift then this is probably what you need to fix it. This...

General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is the Brass Spindle Bush that fits on the inside of the front spindles This will fit the LH or RH sides Direct Replacement What Will I Receive? Qty 1 – Brass Spindle Bush What Vehicle Will This Fit?...

What is This Part?

• This part is the Suzuki OEM Lug Nut Stud that fits into the Front Rotor and receives the lug nut after the wheel has been mounted.
• It is part number 09119-12008.
• To replace all studs it requires 5 studs per rotor.
• These are for the front wheels only.
• The rear wheels requires stud #09119-12006, which we also sell.
• To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
• NOTE: THESE WHEEL STUDS ARE THE NON-CLIPPED HEAD. The 1986 - 1988 have a clipped head. This changed occurred in the late 88 thru early 89 models so please verify which type you need if you are ordering for an 88' or 89' Samurai. From the 90' model Samurai on to 95’ they were all Non-Clipped.
• ALSO INCLUDED: Lug Nuts for the Front Wheel Studs!

What Will I Receive?

• Qty 10 - Front Studs
• Qty 10 - Lug Nuts

What Vehicle Will This Fit?

• Suzuki Samurai      1985 - 1995       All Models
• Suzuki SJ413           1985 - 1995       All Models

General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is a Genuine Suzuki OEM Shifter Direct Replacement What Will I Receive? 5 Speed Transmission Shifter / Control Lever Black What Vehicle Will This Fit? Suzuki Samurai       1990 – 1995        All Models Suzuki SJ413...

General Information

• NEW in the Original Packaging
• Stocked & Shipped From - LEXINGTON, KY

What is This Part?

• This is the Brass Spindle Bush that fits on the inside of the front spindles
• Fits the LH & RH sides
• Direct Replacement OEM Suzuki parts

What Will I Receive?

• Qty 2 - Brass Spindle Bush

What Vehicle Will This Fit?

• Suzuki Samurai          1985 - 1995     All Models
• Suzuki SJ410              1980 - 1984     All Models

General Information

• NEW in the Original Packaging - (Unless Bulk Packed)
• OEM - Made by SUZUKI
• Stocked & Shipped From - LEXINGTON, KY

What is This Part?

• This part is the Lug Nut Stud that fits into the Drum and receives the lug nut after the wheel has been mounted.
• It is part number 09119-12006.
• To replace all studs it requires 5 studs per drum.
• These are for the REAR wheels only.
• The front wheels require a different type stud part #09119-12008, which we also sell.
• To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
• Note: Color May vary

What Will I Receive?

• Qty 10 - Lug Nut Studs (Rear Wheel)

What Vehicle Will This Fit?

• Suzuki Samurai      1988 - 1995       All Models
• Suzuki SJ413           1988 - 1995       All Models

General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is the Sheet Shifter which sits directly below the transfer case shifter. If you are having trouble getting your transfer case to shift then this is probably what you need to fix it. Direct Replacement What...

What is This Part?

• These are the CONE WASHERS & BOLTS that fit onto the Locking Hubs.
• INCLUDES Two Full Sets of Cone Washers & Bolts (Does BOTH Locking Hubs)
• Direct Replacement

What Will I Receive?

• Qty 12 - Cone Washers
• Qty 12 - Bolts
• Qty 12 - Lock Washers

What Vehicle Will This Fit?

• Suzuki Samurai       1985 - 1995        All Models
• Suzuki SJ413           1985 - 1995       All Models

General Information

• NEW in the Original Packaging
• Stocked & Shipped From - LEXINGTON, KY

What is This Part?

• This is the LH and RH Suzuki OEM Front Spindles.
• This will complete Both Sides.
• NOTE: Already has Brass Bushings pressed into place.
• Direct Replacement

What Will I Receive?

• Qty 1 - RH Front Spindle
• Qty 1 - LH Front Spindle

What Vehicle Will This Fit?

• Suzuki Samurai       1985 - 1995        All Models
• Suzuki SJ413           1985 - 1995       All Models

General Information

• NEW in the Original Packaging
• Stocked & Shipped From - LEXINGTON, KY

What is This Part?

• This is the Complete Front Axle Hub & Bearing Rebuild Kit.
• Get everything you need to completely Rebuild the Axles
• Includes both Inner & Outer Axle Bearings
• Does Both Sides
• Includes: Wheel Studs & Lug Nuts
• Direct Replacement

What Will I Receive?

• Qty 2   - Hubs, Front Axle
• Qty 10 - Wheel Studs
• Qty 10 - Lug Nuts
• Qty 2   - Front Axle Inner Bearings
• Qty 2   - Front Axle Outer Bearings
• Qty 2   - Front Axles Inner Oil Seals
• Qty 2   - Front Axles Outer Oil Seals

What Vehicle Will This Fit?

• Suzuki Samurai          1985 - 1995     All Models
• Suzuki SJ410              1980 - 1984     All Models

What is This Part?

• This is the Washer Set for the Front Axle Hub.
• OEM
• Complete for both sides.

 What Will I Receive?

• Qty 2 - Lock Washers
• Qty 2 - Star Washers

What Vehicle Will This Fit?

• Suzuki Samurai      1986 - 1995       All Models
• Suzuki SJ413           1985 - 1995       All Models
• Suzuki SJ410           1980 - 1984       All Models

General Information

• New in the Original Packaging - (Unless Bulk Packed)
• Stocked & Shipped From - LEXINGTON, KY
• Genuine Suzuki OEM Part 

What is This Part?

• This is a Pair of Suzuki OEM Front Hubs.
• Does BOTH SIDES of the Front Axle.

What Will I Receive?

• Qty 2 - Hubs, Front Axle

What Vehicle Will This Fit?

• Suzuki Samurai      1985 - 1995       All Models
• Suzuki SJ413           1985 - 1995       All Models
• Suzuki SJ410           1980 - 1984      All Models

What is This Part?

• This part is the Suzuki OEM Lug Nut Stud that fits into the Front Rotor and receives the lug nut after the wheel has been mounted.
• It is part number 09119-12008.
• To replace all studs it requires 5 studs per rotor.
• These are for the front wheels only.
• The rear wheels requires stud #09119-12006, which we also sell. To purchase that item select the “Wheels/Spare Tire” Category in the far left column.
• NOTE: THESE WHEEL STUDS ARE THE NON-CLIPPED HEAD. The 1986 - 1988 have a clipped head. This changed occurred in the late 88' thru early 89' models so please verify which type you need if you are ordering for an 88' or 89' Samurai. From the 90' model Samurai on to 95’ they were all Non-Clipped.
• Direct Replacement

What Will I Receive?

• Qty 10 - Lug Nut Studs (Front Wheel)

What Vehicle Will This Fit?

• Suzuki Samurai   1988 - 1995    All Models
• Suzuki SJ413       1988 - 1995   All Models