Menu

0

$0.00

  • Home
  • Product shipping classes
  • Large Items By Weight and Dimensions

Large Items By Weight and Dimensions

131 ITEMS

Large Items By Weight and Dimensions

What is This Part?

  • This is the Complete Suzuki OEM “Electronic Fuel Injection Gas Tank Kit.
  • You’ll get an EFI Gas Tank, an “In-Tank” High Pressure Fuel Pump and a Sending Unit.
  • This is all plug and play* for the 1991-1995 Suzuki Samurai’s. (EFI Engines Only)
  • This is also a great kit if you’re converting your existing Samurai to Fuel Injection.
  • Made by SUZUKI
  • Direct Replacement
  • * NOTE: Fuel Pump connectors are no longer made like the 91-95 Samurai. The new connection uses band clamps or wire clamps. If your flexible fuel line hoses going to the fuel pump are still good then simply cut the original connector off the end and slide onto fuel pump line, then secure with clamp.

What Will I Receive?

  • Qty 1 - EFI Fuel Tank
  • Qty 1 - Sending Unit
  • Qty 1 - Gasket, Sending Unit
  • Qty 1 - In-Tank Fuel Pump
  • Qty 1 - Gasket, Fuel Pump

What Vehicle Will This Fit?

  • Suzuki Samurai      1991 - 1995   All Models
  • Suzuki SJ413          1991 - 1995   All Models

What is This Part?

  • These are the Suzuki OEM Front & Rear Leaf Springs
  • Complete Set
  • Made by SUZUKI
  • Direct Replacement

What Will I Receive?

  • Qty 2 - Rear Leaf Springs
  • Qty 2 - Front Leaf Springs

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995   All Models
  • Suzuki SJ413          1985 - 1995   All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the OEM Suzuki Samurai JA Model, Driver's Front Seat plus Headrests. TILT MECHANISMS NOT INCLUDED.
  • These are NOT COVERS but rather the COVERS/FRAME & CUSHION plus HEADREST for the Driver Side .
  • All you will need to do is to remove your existing seats and take off the seat slides and seat recline mechanisms and bolt directly on to these.
  • This seat is Suzuki OEM so your parts will fit perfectly on this seats.
  • The seat color pattern is a light color that is designed to reflect the suns heat giving you a cooler seat in the summer, especially when the tops off.
  • These seats are made from heavy, durable pressed vinyl and have an off-white patterned seating area and a dark gray side and back.
  • These will fit in both JL and JX models.
  • If you need seat slides we have them under the "Interior" category.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Seat Bottom Cushion - Driver’s Side
  • Qty 1 - Seat Back Cushion - Driver’s Side
  • Qty 1 - Headrest - Driver’s Side

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410            1980 - 1984        All Models
FLOOR PANS, FRONT LEFT/RIGHT  - SAMURAI '80-'95

View Product Now!

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the Floor Pan for the Driver's (LH) and Passenger's Side (RH).
  • Comes Pre-primed in Gray/Brown Primer
  • These are made by the OEM manufacturer, however are not considered OEM
  • These are a good, inexpensive way to put new floor pans with correct fitment into vehicle. They are not perfect, and may have hand press bends and pinches.
  • Best result is to cover these with a floor covering after final prep/paint.

Caution: Read Below Statements

Note: These Floor Pans are made for a RHD Samurai but can be modified to fit the LHD Samurai. Affects Seat Tower Bracket & Connection Locations Only. Floor Pan size and Cut Pattern are the same for LHD & RHD

Inspect Pictures and Ask Questions before purchasing because these parts can't be returned.

Condition Statement: Floor Pans are new sheet metal body parts and as such may have minor dings from shipping via sea freight. All sheet metal body parts must be prepared prior to final painting. Items may also contain surface rust.

Special Notice: This part requires the use of welding to be properly installed.

Non-Returnable/ Sale is Final

What Will I Receive?

  • Qty 1 - Floor Pan (Driver Side - LH)
  • Qty 1 - Floor Pan (Passenger Side - RH)

What Vehicle Will This Fit?

  • Suzuki Samurai   1985 - 1995  All Models
  • Suzuki SJ410 1980 - 1984  All Models

What is This Part?

  • This is the Front Drive Shaft, #2 Propeller, that goes from the Transfer Case to the Front Differential
  • FITS ALL MODELS from 1985 thru 1995.
  • Large and Small Bolt Pattern Flanges Included.
  • Simply install the Flange you require on Drive Shaft.
  • Suzuki OEM Drive Shaft
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Front Drive Shaft (OEM)
  • Qty 1 - Small Bolt Pattern Flange 1985 - 1989 (after-market)
  • Qty 1 - Large Bolt Pattern Flange 1990 - 1995 (after-market)

What Vehicle Will This Fit?

  • Small Flange  -  Suzuki Samurai   1985 - 1989         All Models
  • Large Flange  -  Suzuki Samurai    1990 - 1995        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the Suzuki OEM Rear Axle Housing PLUS the Rear Axle Bearing and Oil Seal Repair Kit.
  • It does BOTH SIDES.
  • You get everything you need to complete the repair on both axles.
  • Contains Genuine Suzuki OEM Parts & Quality After-market Parts
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Rear Axle Housing
  • Qty 2 - Bearings (LH & RH)
  • Qty 2 - Oil Seals (LH & RH)
  • Qty 2 - Retainer Ring, Oil Seals (LH & RH)
  • Qty 2 - Protectors, Oil Seals (LH & RH)
  • Qty 8 - Stud Bolts
  • Qty 1 - Breather Cap Assembly
  • Qty 1 - Filler Plug
  • Qty 1 - Drain Plug & Gasket

What Vehicle Will This Fit?

  • Suzuki Samurai          1985 - 1995     All Models

 

EFI FUEL TANK / SENDING UNIT (OEM) - SAMURAI 91'-95'

View Product Now!

What is This Part?

  • This is the Suzuki OEM “Electronic Fuel Injection Gas Tank Kit.
  • You’ll get an EFI Gas Tank and Sending Unit.
  • This is all plug and play* for the 1991-1995 Suzuki Samurai’s. (EFI Engines Only)
  • This is also a great kit if you’re converting your existing Samurai to Fuel Injection.
  • Made by SUZUKI
  • Direct Replacement

What Will I Receive?

  • Qty 1 - EFI Fuel Tank
  • Qty 1 - Sending Unit
  • Qty 1 - Gasket, Sending Unit

What Vehicle Will This Fit?

  • Suzuki Samurai      1991 - 1995   All Models
  • Suzuki SJ413          1991 - 1995   All Models
FLOOR PAN (PASSENGER SIDE) - SAMURAI '80-'95

View Product Now!

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the Suzuki Floor Pan for the Passenger's Side (RH).
  • Comes Pre-primed in Gray/Brown Primer
  • These are made by the OEM manufacturer, however are not considered OEM
  • These are a good, inexpensive way to put new floor pans into Samurai. They are not perfect, and may have hand press bends and pinches.
  • Best result is to cover these with a floor covering after final prep/paint.

Caution: Read Below Statements

Note: These Floor Pans are made for a RHD Samurai but can be modified to fit the LHD Samurai. Affects Seat Tower Bracket & Connection Locations Only. Floor Pan size and Cut Pattern are the same for LHD & RHD

Inspect Pictures and Ask Questions before purchasing because these parts can't be returned.

Condition Statement: Floor Pans are new sheet metal body parts and as such may have minor dings from shipping via sea freight. All sheet metal body parts must be prepared prior to final painting. Items may also contain surface rust.

Special Notice: This part requires the use of welding to be properly installed.

Non-Returnable/ Sale is Final

What Will I Receive?

  • Qty 1 - Floor Pan (Passenger Side - RH)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • Stocked & Shipped From - LEXINGTON, KY
  • New in the Original Packaging

What is this Part?

  • This is the Suzuki OEM Level 1 Brake Rebuild Kit
  • This Rebuild Kit was designed for people whose rear brake cylinders and Lever Assemblies are in good shape and don’t need replacing. So if your good on those then this rebuild kit will give you everything you need to rebuild the front and rear brakes on your Sammy at the lowest possible price.
  • Note: If you want a Rebuild Kit that includes the Rear Brake Cylinders and Lever Assemblies for both sides then purchase our Complete Brake Rebuild Kit.
  • Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

Front Brakes:

  • Qty 2 - Front Calipers
  • Qty 2 - Brake Pads (LH & RH Sides)
  • Qty 2 - Bleeder Plugs w/ Caps for Calipers

Rear Brakes:

  • Qty 4 - Brake Shoes
  • Qty 1 - Rear Brake Drum Repair Kit:
    • Qty 4 - Shoe Hold-down Pins
    • Qty 2 - Hold-down Springs
    • Qty 1 - Spring Rod - Left
    • Qty 1 - Spring Rod - Right
    • Qty 2 - Shoe Return Springs - Short
    • Qty 2 - Shoe Return Springs - Long
    • Qty 2 - Bleeder Valves
    • Qty 2 - Lever Seals
    • Qty 2 - Lever Seal Clips
    • Qty 2 - Lever Stopper
    • Qty 4 - Bolts & Lock Washer's
    • Qty 2 - Cup & Boot Repair Kit

What Vehicle Will This Fit?

  • Suzuki Samurai     1985 - 1995
  • Suzuki SJ413         1985 - 1995

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This part is the Suzuki OEM door glass for Both Sides!
  • You will also receive the attachment seals and metal frame to attach the glass to the regulators.
  • With the new Rubber glass seal and metal glass frame installing this is a breeze.
  • OEM Parts
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Door Glass / LH Side (Drivers Side)
  • Qty 1 - Door Glass / RH Side (Passengers Side)
  • Qty 4 - Rubber Glass Seals (2 for each side)
  • Qty 2 - Glass Mounting Frames (1 for each side)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models
REAR AXLE HOUSING KIT (OEM) - SAMURAI '85-'95

View Product Now!

General Information

  • New in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the Suzuki OEM Rear Axle Housing, Stud Bolts, Filler/Drain Plugs & Breather Cap.
  • This Part Houses all the Rear Drivetrain Parts.
  • Genuine Suzuki OEM Parts
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Rear Axle Housing
  • Qty 8 - Stud Bolts
  • Qty 1 - Breather Cap Assembly
  • Qty 1 - Filler Plug
  • Qty 1 - Drain Plug & Gasket

What Vehicle Will This Fit?

  • Suzuki Samurai 1985 - 1995       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • These Suzuki OEM parts makeup the Complete Targa Bar.
  • These are the Drivers Side (LH) and Passenger Side (RH) Uprights or Vertical Pieces & Center Section.
  • Comes With Trim Garnish for Both Sides!
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Targa Bar LH Vertical Panel
  • Qty 1 - Targa Bar RH Vertical Panel
  • Qty 1 - Targa Bar Center Section
  • Qty 2 - Trim Garnish

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

READ THIS:    Condition Statement - "Metal Body Parts”

This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the Complete Front Axle Hub & Bearing Rebuild Kit.
  • Get everything you need to completely Rebuild the Axles
  • Includes both Inner & Outer Axle Bearings
  • Does Both Sides
  • Includes: Wheel Studs & Lug Nuts
  • Direct Replacement

What Will I Receive?

  • Qty 2   - Hubs, Front Axle
  • Qty 10 - Wheel Studs
  • Qty 10 - Lug Nuts
  • Qty 2   - Front Axle Inner Bearings
  • Qty 2   - Front Axle Outer Bearings
  • Qty 2   - Front Axles Inner Oil Seals
  • Qty 2   - Front Axles Outer Oil Seals

What Vehicle Will This Fit?

  • Suzuki Samurai          1985 - 1995     All Models
  • Suzuki SJ410              1980 - 1984     All Models

 

TARGA BAR W/CENTER (OEM) - SAMURAI '80-'95

View Product Now!

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • These Suzuki OEM parts makeup the Complete Targa Bar.
  • These are the Drivers Side (LH) and Passenger Side (RH) Uprights or Vertical Pieces & Center Section.
  • Direct Replacement

READ THIS:    Condition Statement - "Metal Body Parts”

This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.

What Will I Receive?

  • Qty 1 - Targa Bar LH Vertical Panel
  • Qty 1 - Targa Bar RH Vertical Panel
  • Qty 1 - Targa Bar Center Section

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ413           1985 - 1995       All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the complete Front Axle & Steering Knuckle Rebuild Kit.
  • Get everything you need to completely rebuild your Front Axles & Knuckles.
  • Comes with King Pins & Bearings PLUS Front Axle Bearings & Oil Seals!
  • This Kits Even Includes the Chuck Nuts, Lock Washers & Torque Washers!
  • DOES BOTH SIDES!
  • Direct Replacement

What Will I Receive?

KNUCKLE

  • Qty 4 - King Pins

  • Qty 4 - King Pin Bearings

  • Qty 4 - Shims for King Pins

  • Qty 2 - Steering Knuckle Oil Seals

  • Qty 2 - Steering Knuckle Felts

  • Qty 4 - Retainer Plate, Knuckle Oil Seal

  • Qty 4 - Cover Plate, Knuckle Oil Seal

FRONT AXLES

  • Qty 2 - Inner Bearings

  • Qty 2 - Outer Bearings

  • Qty 2 - Inner Oil Seals

  • Qty 2 - Outer Oil Seals

  • Qty 4 - Chuck Nuts

  • Qty 2 - Lock Washers

  • Qty 2 - Torque Washers

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

 

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • These are the Suzuki OEM Steering Knuckle Assembly's for the Driver & Passenger Sides.
  • Driver Side & Passenger Sides Included
  • OEM Parts
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Steering Knuckle Assembly (Passenger Side)
  • Qty 1 - Steering Knuckle Assembly (Driver Side)

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the complete Steering Knuckle & Steering Knuckle Rebuild Kit for Left Hand Side.
  • Driver Side
  • Get everything you need to completely rebuild your Driver Side Front-End Knuckle.
  • Includes OEM Knuckle Assembly
  • Comes with King Pins & Bearings!
  • Comes with Felt & Oil Seal!
  • COMPLETE LEFT SIDE!
  • Direct Replacement
  • NOTE: Color of Oil Seal may vary

What Will I Receive?

  • Qty 1 - Steering Knuckle Assembly
  • Qty 2 - King Pins
  • Qty 2 - King Pin Bearings
  • Qty 2 - Shims for King Pins
  • Qty 1 - Steering Knuckle Oil Seal
  • Qty 1 - Steering Knuckle Felt
  • Qty 2 - Retainer Plates, Knuckle Oil Seal
  • Qty 2 - Cover Plates, Knuckle Oil Seal

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This is the complete Steering Knuckle & Steering Knuckle Rebuild Kit for RH Side.
  • Passenger Side (RH)
  • Get everything you need to completely rebuild your Passenger Side Front-End Knuckle.
  • Includes OEM Knuckle Assembly
  • Comes with King Pins & Bearings!
  • Comes with Felt & Oil Seal!
  • COMPLETE RH SIDE!
  • Direct Replacement
  • NOTE: Color of Oil Seal may vary

What Will I Receive?

  • Qty 1 - Steering Knuckle Assembly
  • Qty 2 - King Pins
  • Qty 2 - King Pin Bearings
  • Qty 2 - Shims for King Pins
  • Qty 1 - Steering Knuckle Oil Seal
  • Qty 1 - Steering Knuckle Felt
  • Qty 2 - Retainer Plates, Knuckle Oil Seal
  • Qty 2 - Cover Plates, Knuckle Oil Seal

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984        All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • These are the Suzuki OEM Left & Right Targa Vertical Pieces.
  • These are the Drivers Side (LH) and Passenger Side (RH) Uprights
  • Comes With Trim Garnish for Both Sides
  • Requires Garnish Trim Attachment Clips
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Targa Bar LH Vertical Panel
  • Qty 1 - Targa Bar RH Vertical Panel
  • Qty 2 - Trim Garnish

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

READ THIS:    Condition Statement - "Metal Body Parts”

This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.

 

REAR BRAKE BACKING PLATE SET (OEM) - SAMURAI '85-'95

View Product Now!

General Information

  • Stocked & Shipped From - LEXINGTON, KY
  • New in the Original Packaging

What is this Part?

  • This is the Suzuki OEM Rear Brake Backer Plate
  • It fits the Driver's Side and Passenger's Side
  • Suzuki OEM Part
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Rear Brake Backer Plate (Right Side)
  • Qty 1 - Rear Brake Backer Plate (Left Side)

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995       All Models
  • Suzuki SJ413          1985 - 1995       All Models
VALVE COVER (OEM/SGP) - SAMURAI '85-'95

View Product Now!

What is This Part?

  • This is the Suzuki OEM Valve Cover for the G13A & G13BA Engine.
  • Please look at pictures carefully as Suzuki has made minor changes to Cover.
  • Made by SUZUKI
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Valve Cover
  • Qty 1 - Oil Fill Cap
  • Qty 4 - Washers, Valve Cover

What Vehicle Will This Fit?

  • Suzuki Samurai      1985 - 1995   All Models
  • Suzuki SJ413          1985 - 1995   All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - LEXINGTON, KY

What is This Part?

  • This part is the Suzuki OEM door glass for the RH Side plus the attachment seals and metal frame to attach the glass to the regulator.
  • With the new Rubber glass seal and metal glass frame installing this is a breeze.
  • Without these pieces you're in for a long day.
  • *The picture shows a LH glass but you will receive a new RH glass.
  • Direct Replacement

What Will I Receive?

  • Qty 1 - Door Glass - RH Side (Passengers Side) (New and Scratch FREE)
  • Qty 2 - Rubber Glass Seals
  • Qty 1 - Glass Frame

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models

General Information

  • NEW in the Original Packaging
  • Stocked & Shipped From - Lexington, KY

What is This Part?

  • This part is the Suzuki OEM door glass for the LH Side plus the attachment seals and metal frame to attach the glass to the regulator.
  • With the new Rubber glass seal and metal glass frame installing this is a breeze.
  • Without these pieces you're in for a long day. 
  • Direct Replacement

What Will I Receive?

  • Qty 1 Door Glass - LH Side (Drivers Side)
  • Qty 2 Rubber Glass Seals
  • Qty 1 Glass Frame

What Vehicle Will This Fit?

  • Suzuki Samurai       1985 - 1995        All Models
  • Suzuki SJ410           1980 - 1984       All Models