Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This Suzuki OEM part that fastens onto the window frame and connects to the windshield frame to the door rail.
- Comes in pairs (LH & RH).
- Comes Primed in Gray
- NOTE: These Brackets only require a "one screw” mount to the Windshield Frame (The old style required a “two screw” mount. This is done to leave room for installing a Hard-Top and the necessary mounting latches (which will use those holes) . It also works fine with a Soft Top and it allows you to easily switch back and forth from a Hard Top to a Soft Top. When you are using the Soft Top you will have one screw hole that is unused unless you have the Hard Top Mounting Latch installed.
- Direct Replacement
What Will I Receive?
- Qty 1 - Door Rail Mounting Bracket - RH
- Qty 1 - Door Rail Mounting Bracket - LH
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ413 1985 - 1995 All Models
- Suzuki SJ410 1980 - 1984 All Models
Select Free Shipping in Cart!
What is This Part?
- These are the Suzuki OEM -REAR- bumper connecter brackets.
- These brackets bolt to the rear frame.
- Once attached to the frame then the bumper is bolted to these brackets.
- Direct Replacement
What Will I Receive?
- Qty 1 - RH Bracket
- Qty 1 - LH Bracket
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ410 1980 - 1984 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- These are the Suzuki OEM -FRONT- bumper connecter brackets.
- These brackets bolt to the front frame.
- Once attached to the frame then the bumper is bolted to these brackets.
- Direct Replacement
What Will I Receive?
- Qty 1 - LH Front Bumper Bracket
- Qty 1 - RH Front Bumper Bracket
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ410 1980 - 1984 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- These Suzuki OEM parts fasten from the lower hood support to the upper hood support in the grill area.
- Direct Replacement
What Will I Receive?
- Qty 2 - Vertical Hood Supports
What Vehicle Will This Fit?
- Suzuki Samurai 1990 - 1995 All Models
- Suzuki SJ413 1990 - 1995 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Weld-On Tow Ring that Mounts to the Front Cross Member.
- Come Primed and Ready to Prep for Paint!
- NOTE: The Studs can be Removed Leaving Only the Tow Ring.
What Will I Receive?
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- These are Original OEM Suzuki Grill Mount Supports for 1992 - 1995 Samurai Models
- Made by Suzuki
- Direct Replacement
What Will I Receive?
What Vehicle Will This Fit?
- Suzuki Samurai 1992 - 1995 All Models
Select Free Shipping in Cart!
General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is...
Price
$24.99 Original price was: $24.99.$19.99Current price is: $19.99.
Total
$24.99 Original price was: $24.99.$19.99Current price is: $19.99.
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Suzuki OEM Rear Floor Panel for the Front LH wheel housing
- This is a fit for the Gypsy King or Samurai LWB
- Goes in front of wheel housing panel
- Direct Replacement
What Will I Receive?
- Qty 1 - LH, Panel, Side Front
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 Long Wheel Base
- Suzuki Gypsy King 1985 - 1995
READ THIS: Condition Statement - "Metal Body Parts”
This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.
Price
$24.99 Original price was: $24.99.$19.99Current price is: $19.99.
Total
$24.99 Original price was: $24.99.$19.99Current price is: $19.99.
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Suzuki OEM Rear Floor Panel for the Front RH wheel housing
- This is a fit for the Gypsy King or Samurai LWB
- Goes in front of wheel housing panel
- Direct Replacement
What Will I Receive?
- Qty 1 - RH, Panel, Side Rear
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 Long Wheel Base
- Suzuki Gypsy King 1985 - 1995
READ THIS: Condition Statement - "Metal Body Parts”
This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.
Select Free Shipping in Cart!
General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? These are...
Select Free Shipping in Cart!
General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is...
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Mud Flaps for the Rear Wheels
- Direct Replacement
What Will I Receive?
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ410 1980 - 1984 All Models
Select Free Shipping in Cart!
What is This Part?
- This is the Suzuki OEM Fuel Filler Inlet for the gas tank
- Fits fuel injected and carbureted models
- Direct Replacement
What Will I Receive?
- Qty 1 - Gas Cap
- Qty 1 - Fuel Filler Inlet
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ413 1985 - 1995 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the License Plate Mounting Bracket and the three Attachment Screws.
- Comes Pre-Painted Black
- Direct Replacement
What Will I Receive?
- Qty 1 - License Plate Mounting Bracket
- Qty 3 - Attachment Screws
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ413 1985 - 1995 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the License Plate Mounting Bracket and the three Attachment Screws.
- Also comes with the Bolt-on Brace for the newer models.
- Comes Pre-Painted Black
- Direct Replacement
What Will I Receive?
- Qty 1 - License Plate Mounting Bracket
- Qty 3 - Attachment Screws
- Qty 1 - Bolt-on Brace
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ413 1985 - 1995 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Suzuki OEM Metal Cover for the lower section of the fuel inlet pipe.
- Direct Replacement
What Will I Receive?
- Qty 1 - Lower Fuel Inlet Pipe Cover
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ413 1985 - 1995 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Suzuki OEM Metal Cover for the upper section of the fuel tank
- Direct Replacement
What Will I Receive?
- Qty 1 - Upper Metal Cover
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ413 1985 - 1995 All Models
READ THIS: Condition Statement - "Metal Body Parts”
This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Suzuki OEM Rear Floor Panel for the Rear RH wheel housing
- This is a fit for the Samurai LWB or Gypsy King
- Goes behind wheel housing panel
- Direct Replacement
What Will I Receive?
- Qty 1 - RH, Panel, Side Rear
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 Long Wheel Base
- Suzuki Gypsy King 1985 - 1995
READ THIS: Condition Statement - "Metal Body Parts”
This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Suzuki OEM Door Rail that Fastens Directly above the Drivers Door
- Connects to the windshield frame on one end and the targa bar on the other end.
- Direct Replacement
What Will I Receive?
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ410 1980 - 1984 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Suzuki OEM Door Rail that Fastens Directly above the Passengers Door.
- Connects to the windshield frame on one end and the targa bar on the other end.
- Direct Replacement
What Will I Receive?
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ410 1980 - 1984 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Suzuki OEM Holder for the Fender Flare for the Rear Driver’s Side.
- Comes primed and Ready To Prep for Paint.
- Suzuki OEM
- Direct Replacement
What Will I Receive?
- Qty 1 - Holder, Fender Flare - Rear Drivers Side
What Vehicle Will This Fit?
- Suzuki Samurai 1990 - 1995 All Models
- Suzuki SJ413 1990 - 1995 All Models
READ THIS: Condition Statement - "Metal Body Parts”
This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions BEFORE BUYING. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Suzuki OEM Holder for the Fender Flare for the Rear Passenger’s Side.
- Comes primed and Ready To Prep for Paint.
- Suzuki OEM
- Direct Replacement
What Will I Receive?
- Qty 1 - Holder, Fender Flare - Rear Passenger Side
What Vehicle Will This Fit?
- Suzuki Samurai 1990 - 1995 All Models
- Suzuki SJ413 1990 - 1995 All Models
READ THIS: Condition Statement - "Metal Body Parts”
This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions BEFORE BUYING. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.
Select Free Shipping in Cart!
General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This Suzuki OEM part is...
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is a Suzuki OEM Hood Cowling.
- This part mounts directly behind the hood.
- Direct Replacement
What Will I Receive?
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ413 1985 - 1995 All Models
READ THIS: Condition Statement - "Metal Body Parts”
This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions BEFORE BUYING. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.
Select Free Shipping in Cart!
General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is...
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Suzuki OEM Front Bumper Bar Cross Member.
- This is what the Front Bumper attaches to.
- Comes with the LH & RH Bumper Attachment Plates
- Direct Replacement
What Will I Receive?
- Qty 1 - Cross Member, Front Bumper
- Qty 1 - RH Bumper Attachment Plate
- Qty 1 - LH Bumper Attachment Plate
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ413 1985 - 1995 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- These Suzuki OEM parts fasten directly above the passengers and drivers doors
- Connects to the windshield frame on one end and the targa bar on the other end.
- Direct Replacement
What Will I Receive?
- Qty 1 - Door Rail - LH
- Qty 1 - Door Rail - RH
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ410 1980 - 1984 All Models
Price
$129.99 Original price was: $129.99.$89.99Current price is: $89.99.
Total
$129.99 Original price was: $129.99.$89.99Current price is: $89.99.
Clearance w/ Free Shipping!
General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? These are...
Price
$179.99 Original price was: $179.99.$99.99Current price is: $99.99.
Total
$179.99 Original price was: $179.99.$99.99Current price is: $99.99.
Sale w/ Free Shipping!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Suzuki OEM Floor Pan for the Driver's Side (LH).
- Comes Pre-primed in Gray Primer
- Floor Pan size and Cut Pattern are the same for LHD & RHD
Caution: Read Below Statements
Note: This Floor Pan is made for a RHD Samurai but can be modified to fit the LHD Samurai. Affects Seat Tower Bracket & Connection Locations Only. Floor Pan size and Cut Pattern are the same for LHD & RHD
Inspect Pictures and Ask Questions before purchasing because these parts can’t be returned.
Condition Statement: Floor Pans are new sheet metal body parts and as such may have minor dings from shipping via sea freight. All sheet metal body parts must be prep’d prior to final painting. Special Notice: This part requires the use of welding to be properly installed.
Non-Returnable/ Sale is Final
What Will I Receive?
- Qty 1 - Floor Pan (Driver Side - LH)
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ410 1980-1984 All Models
Select Free Shipping in Cart!
General Information NEW in the‚ Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is Suzuki...
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Suzuki OEM “Lower Hood Support”.
- Fastens across the bottom of the grill area and connects from one fender to the other.
- The bottom of the vertical grill supports mount to this part.
- Direct Replacement
READ THIS: Condition Statement - "Metal Body Parts”
This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.
What Will I Receive?
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ413 1985 - 1995 All Models
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Suzuki OEM Metal Rear Bumper Bar.
- This is a true OEM bumper so it will attach to your existing brackets without any modification
- Pre-Painted Black
- Made by SUZUKI
- Direct Replacement
What Will I Receive?
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ410 1980 - 1984 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Suzuki OEM Lower Bed Tail Member piece.
- It fits directly below the Tailgate.
- Come Primed and Ready to Prep for Paint!
- Direct Replacement
What Will I Receive?
- Qty 1 - Tail Member, Lower Bed
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ413 1985 - 1995 All Models
Select Free Shipping in Cart!
General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? These are...
Select Free Shipping in Cart!
What is This Part?
- This is the Suzuki OEM “Upper Hood Support”.
- It fastens across the Top of the grill area and connects from one fender to the other.
- The Top of the two vertical grill supports mount to this part and are included.
- Direct Replacement
READ THIS: Condition Statement - "Metal Body Parts”
This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.
What Will I Receive?
- Qty 1 - Upper Hood Support (Upper Member)
- Qty 2 - Vertical Hood Supports
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ413 1985 - 1995 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is a New Style Grill Retro-Fit kit made up of a OEM Front Grill and other OEM Parts (See Below)
- Includes everything you need to change your "old style" Grill to a "new style" Grill
- The Front Grill is made from High Impact Plastic and is pre-finished in a Gray Metallic.
- The Front Support Brackets are pre-finished in Satin Black
What Will I Receive?
- Qty 1 - Grill
- Qty 1 - Grill Mesh
- Qty 1 - Suzuki "S" Emblem
- Qty 2 - Support Brackets
- Qty 4 - Plastic Screw Nuts
- Qty 6 - Grill Attachment Screws
- Qty 4 - Support Bracket Attachment Screws
What Vehicles Will This Fit?
- Suzuki Samurai 1985 - 1991
- Suzuki SJ410 1980 - 1984
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is a Suzuki OEM Front Bumper Bar
- Suzuki OEM Part
- Direct Replacement
- Condition Statement:
- This bumper is formed via a stamped metal process and has minor surface imperfections that are typical to this process. While acceptable for normal Samurais, if you are building a show vehicle this bumper may not meet your needs.
What Will I Receive?
What Vehicles Will This Fit?
- Suzuki Samurai 1985 - 1995
- Suzuki SJ410 1980 - 1984
Request Quote for Freight
General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is...
Price
$299.99 Original price was: $299.99.$149.99Current price is: $149.99.
Total
$299.99 Original price was: $299.99.$149.99Current price is: $149.99.
Clearance w/ Free Shipping!
General Information Considered Refurbished Condition Stocked & Shipped From – LEXINGTON, KY What is This Part? This is the Front...
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- These are the Suzuki OEM Left & Right Targa Vertical Pieces.
- These are the Drivers Side (LH) and Passenger Side (RH) Uprights
- Comes With Trim Garnish for Both Sides
- Requires Garnish Trim Attachment Clips
- Direct Replacement
What Will I Receive?
- Qty 1 - Targa Bar LH Vertical Panel
- Qty 1 - Targa Bar RH Vertical Panel
- Qty 2 - Trim Garnish
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ410 1980 - 1984 All Models
READ THIS: Condition Statement - "Metal Body Parts”
This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Suzuki OEM Rear Wheel for the LH Side (Driver Side).
- Comes Primed and ready to prep for paint.
- Direct Replacement
What Will I Receive?
- Qty 1 - Wheel Well (LH Side)
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ410 1980 - 1984 All Models
READ THIS: Condition Statement - "Metal Body Parts”
This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Suzuki OEM Rear Wheel for the RH Side (Passenger Side).
- Comes Primed and ready to prep for paint.
- Direct Replacement
What Will I Receive?
- Qty 1 - Wheel Well (RH Side)
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ410 1980 - 1984 All Models
READ THIS: Condition Statement - "Metal Body Parts”
This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Front Bumper and Both Front Bumper End Caps.
- This is an OEM Front Bumper that was made by Suzuki that is pre-painted black
- Comes with the after-market Bumper Corner Caps for both sides
- Includes the install clips for the End Caps
- Direct Replacement
- NOTE: This bumper is formed via a stamped metal process and has surface imperfections that are typical to this process. While acceptable for normal Samurais, if you are building a show vehicle this bumper may not meet your needs.
What Will I Receive?
- Qty 1 - Front Bumper (OEM)
- Qty 1 - LH Protector Cap (After-Market)
- Qty 1 - RH Protector Cap (After-Market)
- Qty 1 - Installation Clip Set
What Vehicles Will This Fit?
- Suzuki Samurai 1985 - 1995
- Suzuki SJ410 1980 - 1984
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is a Suzuki OEM Tailgate
- Works with both the old style & new style spare tire holders
- Direct Replacement
What Will I Receive?
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ410 1980 - 1984 All Models
READ THIS: Condition Statement - "Metal Body Parts”
This listing is for Metal Body Parts. All Metal Body Parts may contain Dings, Scrapes and Factory Spot Welds. Dings, Scrapes and Factory Spot Welds are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- These Suzuki OEM parts makeup the Complete Targa Bar.
- These are the Drivers Side (LH) and Passenger Side (RH) Uprights or Vertical Pieces & Center Section.
- Direct Replacement
READ THIS: Condition Statement - "Metal Body Parts”
This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.
What Will I Receive?
- Qty 1 - Targa Bar LH Vertical Panel
- Qty 1 - Targa Bar RH Vertical Panel
- Qty 1 - Targa Bar Center Section
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ413 1985 - 1995 All Models
- Suzuki SJ410 1980 - 1984 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Front Bumper and Both Front Bumper End Caps.
- This is an OEM Front Bumper that was made by Suzuki that is pre-painted black and comes with the Bumper Corner Caps for both sides and the install clips.
- Direct Replacement
What Will I Receive?
- Qty 1 - Front Bumper
- Qty 1 - LH Protector Cap (Drivers Side)
- Qty 1 - RH Protector Cap (Passengers Side)
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ413 1985 - 1995 All Models
- Suzuki SJ410 1980 - 1984 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Front Bumper, Both Front Bumper End Caps, and Front Blinkers
- Front Bumper is pre-painted black
- Includes Bumper End Caps
- Includes Front Turn Lights
- Turn Key Install
- Direct Replacement
- NOTE: This bumper is formed via a stamped metal process and has surface imperfections that are typical to this process. While acceptable for normal Samurais, if you are building a show vehicle this bumper may not meet your needs.
What Will I Receive?
- Qty 1 - Front Bumper (OEM)
- Qty 1 - LH Protector Cap (After-Market)
- Qty 1 - RH Protector Cap (After-Market)
- Qty 1 - LH Blinker Light (After-Market)
- Qty 1 - RH Blinker Light (After-Market)
What Vehicles Will This Fit?
- Suzuki Samurai 1985 - 1995
- Suzuki SJ410 1980 - 1984
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- These Suzuki OEM parts makeup the Complete Targa Bar.
- These are the Drivers Side (LH) and Passenger Side (RH) Uprights or Vertical Pieces & Center Section.
- Comes With Trim Garnish for Both Sides!
- Direct Replacement
What Will I Receive?
- Qty 1 - Targa Bar LH Vertical Panel
- Qty 1 - Targa Bar RH Vertical Panel
- Qty 1 - Targa Bar Center Section
- Qty 2 - Trim Garnish
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ410 1980 - 1984 All Models
READ THIS: Condition Statement - "Metal Body Parts”
This listing is for Metal Body Parts. All Metal Body Parts will contain Minor Dings and Scrapes. Minor Dings and Scrapes are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.
Select Free Shipping in Cart!
General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is...
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging - (Unless Bulk Packed)
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Suzuki OEM Front Bumper, Front Bumper End Caps and Lights.
- Front Bumper is pre-painted black
- Comes with the install clips & screws for the Bumper End Caps
- Suzuki OEM Parts
- Direct Replacement
What Will I Receive?
- Qty 1 - Front Bumper
- Qty 2 - Front Turn Lights (LH & RH)
- Qty 1 - LH Protector Cap (Drivers Side)
- Qty 1 - RH Protector Cap (Passengers Side)
Fitment
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ410 1980 - 1984 All Models
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is a Suzuki OEM Tailgate
- Works with both the old style & new style spare tire holders
- Direct Replacement
What Will I Receive?
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ410 1980 - 1984 All Models
READ THIS: Condition Statement - "Metal Body Parts”
This listing is for Metal Body Parts. All Metal Body Parts may contain Dings, Scrapes and Factory Spot Welds. Dings, Scrapes and Factory Spot Welds are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer’s Acknowledgement of Reading and Acceptance of the Above Condition Statement.
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Floor Pan for the Driver's (LH) and Passenger's Side (RH).
- Comes Pre-primed in Gray Primer
- These are made by the OEM manufacturer, however are not considered OEM
Caution: Read Below Statements
Note: This Floor Pan is made for a RHD Samurai but can be modified to fit the LHD Samurai. Affects Seat Tower Bracket & Connection Locations Only.Floor Pan size and Cut Pattern are the same for LHD & RHD
Inspect Pictures and Ask Questions before purchasing because these parts can’t be returned.
Condition Statement: Floor Pans are new sheet metal body parts and as such may have minor dings from shipping via sea freight. All sheet metal body parts must be prepared prior to final painting. Special Notice: This part requires the use of welding to be properly installed.
Non-Returnable/ Sale is Final
What Will I Receive?
- Qty 1 - Floor Pan (Driver Side - LH)
- Qty 1 - Floor Pan (Passenger Side - RH)
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models
- Suzuki SJ410 1980 - 1984 All Models
Select Free Shipping in Cart!
General Information NEW in the Original Packaging Stocked & Shipped From – LEXINGTON, KY What is This Part? This is...
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Front Fender Well
- Pre-attached Fender Flare
- Direct Replacement
What Will I Receive?
- Qty 1 - Front Fender (LH) Driver Side
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models with Metal Flares
- Suzuki SJ413 1985 - 1995 All Models with Metal Flares
- NOTE: Some modification will be necessary to fit plastic flares.
READ THIS: Condition Statement - "Metal Body Parts"
This listing is for Metal Body Parts. All Metal Body Parts may contain Dings, Scrapes and Factory Spot Welds. Dings, Scrapes and Factory Spot Welds are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer's Acknowledgement of Reading and Acceptance of the Above Condition Statement.
Select Free Shipping in Cart!
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the Front Fender Well
- Pre-attached Fender Flare
- Direct Replacement
What Will I Receive?
- Qty 1 - Front Fender (RH) Passenger Side
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 All Models with Metal Flares
- Suzuki SJ413 1985 - 1995 All Models with Metal Flares
- NOTE: Some modification will be necessary to fit plastic flares.
READ THIS: Condition Statement - "Metal Body Parts"
This listing is for Metal Body Parts. All Metal Body Parts may contain Dings, Scrapes and Factory Spot Welds. Dings, Scrapes and Factory Spot Welds are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer's Acknowledgement of Reading and Acceptance of the Above Condition Statement.
Request Quote for Freight
General Information
- NEW in the Original Packaging
- Stocked & Shipped From - LEXINGTON, KY
What is This Part?
- This is the set of LH and RH side body panels
- Pre-attached Fuel Filler Neck on RH side
- Direct Replacement
What Will I Receive?
- Qty 1 - Driver Side (LH) Body Panel
- Qty 1 - Passenger Side (RH) Body Panel with Fuel Filler Neck
What Vehicle Will This Fit?
- Suzuki Samurai 1985 - 1995 LWB Model or LWB Conversion
- Suzuki SJ413 1985 - 1995 LWB Model or LWB Conversion
- NOTE: Some modification will be necessary to fit plastic flares.
READ THIS: Condition Statement - "Metal Body Parts"
This listing is for Metal Body Parts. All Metal Body Parts may contain Dings, Scrapes and Factory Spot Welds. Dings, Scrapes and Factory Spot Welds are Considered Normal. These Parts Can Not be Painted Unless Professionally Prepared. Preparation Includes Cleaning, Sanding, Filling, Priming and Possibly Other Work Based on Final Use Requirements. Ask Questions before buying. Purchasing of this Part Constitutes Buyer's Acknowledgement of Reading and Acceptance of the Above Condition Statement.
